Honeywell MAXPRO-NET manual Executing a Macro, Automated Control

4.1.3Automated Control

The MAXPRO-Net Crosspoint Maxtrix Video Switching System can be configured to control a variety of equipment other than cameras and monitors. The keyboard actions used to manually control this auxiliary equipment can also be recorded in a macro for later play back for automated control of the system.

Selecting cameras to video recorders, activating record, turning lighting on, or opening door latches and boom gates could all be included in one automated control macro.

Any system action that can be made by an operator at a keyboard can be stored in a MACRO for later use.

4.2EXECUTING A MACRO

To execute a MACRO sequence, press the key followed by the two-digit macro number required. Valid MACRO's are (00 Ù 99).

•for example, .. executes MACRO (65).

•or .. executes MACRO (00).

If the macro has been defined, the following message will display briefly on your current monitor:

The macro will now play back the recorded keystrokes. Salvo camera selections are played back instantly. Camera Walks are played back in real-time. Automated control actions can play back as a combination of the two depending on the keypress functions recorded.

When the macro play back is complete, the following message will display briefly on your current monitor:

Rev. A	4-2	HMXMU001056
		03/16/05