Honeywell MAXPRO-NET manual Chapter Message Prompts, Introduction, Selections

CHAPTER 8:

MESSAGE PROMPTS

8.1INTRODUCTION

The MAXPRO-Net Crosspoint Matrix Video Switching System creates an interactive environment for the system operators. Using the keyboard, an operator is able to communicate and control the video system.

The system will also communicate with the operator using text message prompts. These are displayed on the operator's currently selected monitor. These message prompts are designed to confirm selection and control actions as well as to help the operator understand why a particular action or function may not have occurred as expected.

The message prompts have been grouped into several tables. Refer to the appropriate table to quickly locate the message prompt explanation required.

8.2	SELECTIONS
	Message Prompt	Explanation
	Not while scanning	Before selecting a camera to this monitor, the current scan
		sequence must be halted.
	Not available	The selected camera is not available for selection on this monitor,
		or by this operator.
	Invalid source	You tried to select the video output of the currently selected VCR
		(or other device) back onto its own video input.
	Source denied	This operator cannot gain access to the selected camera (or VCR).
	Source locked	The selected camera (or VCR) is currently locked and cannot be
		accessed at this time.
	*Unknown source*	The default video input selection for the monitor (VCR or other
		device) has not been defined in the system.
	Channel locked	The currently selected camera or scan sequence (on the monitor)
		cannot be changed. The monitor must first be unlocked.
	Undefined monitor	The requested monitor does not exist in the system.
	Monitor denied	The requested monitor cannot be accessed from this keyboard
		location.
	Monitor is busy	The monitor cannot be selected at this time, as it is already in use
		by another operator (of a higher priority).

Rev. A	8-1	HMXMU001056
		03/16/05