Honeywell MAXPRO-NET manual Liveupdate Begin

8.2 SELECTIONS, CONTINUED

Message Prompt	Explanation
Set source	You can now enter the camera selection to be set as the new
	source selection of the VCR (or other device) currently on the
	monitor. It is not selected directly onto the monitor but to the video
	input of the VCR itself.
Access denied	Your keyboard does NOT have access to this VCR (or other
	device). It cannot make new video source selections for this VCR's
	video output channel.
Undefined output	The VCR (or other device) does not support camera selection. It
	does not have a video output channel defined in the system.
Local source error	The selected pseudo camera is not correctly defined in the system.
	The actual physical camera cannot be found.
Source nest error	The selected pseudo camera is not correctly defined in the system.
	It is wrongly defined to use another pseudo camera and not a
	physical camera.
Network failed	The selected camera is from another networked video system.
	That networked system has currently failed so the camera cannot
	be selected.
Invalid net source	The camera being selected does not exist on the same network
	system as the remote-monitor (trunk channel or other network
	device) it is being selected to.
Undefined source	The selected camera (VCR or other device) does not exist. It is not
	defined as a video input on the system.
Using link: #..	This prompt message confirms the actual video trunk line # that
	has been used to connect the selected network camera to this
	monitor.
Share link: #..	This prompt message confirms that the selected network camera
	was already available on the video trunk line #. This video trunk
	line is now shared with this monitor.
Link request KB: ..	Another operator requires the video trunk line you are currently
	using. Selecting a local camera will release the video trunk line.
Network link busy	All video trunk lines are already in use. Your camera selection
	cannot be made at this time. The system has already sent a 'link
	request' prompt to other operators asking them to hurry up and
	release the video trunk lines.
Network link taken	The video trunk line used to connect the selected camera to this
	monitor has been taken by another operator (of a higher priority).
	The monitor has been forced to display a different camera,
	releasing the video trunk line.
LIVEUPDATE BEGIN	This indicates that the system administrator has made changes to
	the system configuration and is updating live to the MAXPRO-Net
	Server. The operator should wait till the operation is complete.

Rev. A	8-2	HMXMU001056
		03/16/05