Honeywell MAXPRO-NET manual PAN-TILT Control

8.4PAN-TILT CONTROL

	Message Prompt	Explanation
	Fixed camera	This camera does NOT have any PTZ capability.
	Not while scanning	Before controlling the PTZ camera on this monitor the current scan
		sequence must be halted.
	PTZ denied	The keyboard operator does not have access to control this PTZ
		camera.
	PTZ busy	Another keyboard operator is currently controlling this camera
		PTZ.
	PTZ locked	All of the camera PTZ control functions have been locked. The
		PTZ cannot be controlled until it is unlocked.
	PTZ site failed	The camera PTZ site receiver has failed. The camera cannot be
		controlled until the PTZ site receiver recovers.
	Ctrl config. error	The PTZ (or VCR) control definition has been incorrectly
		configured. Control of this device is not possible until it is properly
		defined in the system.
	No pan	This PTZ camera does not support the pan left/right control
		functions.
	No tilt	This PTZ camera does not support the tilt up/down control
		functions.
	No focus	This PTZ camera does not support control of lens focus.
	No Zoom	This PTZ camera does not support control of lens zoom.
	No iris control	This PTZ camera does not support manual iris control.
	No wash/wipe	This PTZ camera does not support wash and wipe control.
	No flashback	This PTZ camera does not support the FLASHBACK control
		function.
	No views	This PTZ camera does not support preset views.
	<PTZ aux>	This prompt confirms the SHIFT to the auxiliary PTZ control
		functions available from the lens keys on the RD-500 control
		keyboard for control of wash, wipe and manual-iris.
	<Open>	The PTZ camera manual iris is opening.
	<Close>	The PTZ camera manual iris is closing.
	<Wash>	The wash function of the PTZ is operating.
	<Wipe>	The wipe function of the PTZ is operating.
	<Flashback>	The PTZ camera FLASHBACK function has been operated.
	Moving to view (xx)	The PTZ camera is moving to the selected preset view (xx).
	Set view (00-99)	Enter the PTZ camera preset view number to be set (two digits).
Rev. A		8-5	HMXMU001056
			03/16/05