5.9STEPPING THROUGH THE ALARM STACK
CAUTION: You must currently be selecting the monitor that is displaying the flashing alarm messages.
On the HEGS5300 enhanced keyboard, pressing the 
key will manually force the alarm stack to cycle to the next active alarm. Immediately, the next alarm will be displayed on the monitor.
The alarm stack will still automatically cycle after the usual pause period.
5.10CLEARING AN ALARM
When an alarm is manually cleared from a keyboard, it is removed from the alarm stack so it will not continue to be displayed again. With the exception of LATCHING alarms, the manually cleared alarm is still active and remains so until it physically returns to its normal state. Once this has happened, its next activation will be detected again.
CAUTION: You must currently be selecting the monitor that is displaying the flashing alarm messages.
Press the 
key to clear the currently displayed alarm. After a short pause the message prompt;
will be displayed. Immediately, that alarm is removed from the stack and the next alarm is displayed on the monitor.
When ALL alarms have been cleared, the text display on the monitor will return to normal.
CAUTION: While the flashing alarm text is displayed on the monitor, none of the normal text messages will be displayed.
Rev. A | HMXMU001056 | |
|
| 03/16/05 |