Honeywell MAXPRO-NET manual Make a NEW Macro

4.2 EXECUTING A MACRO, CONTINUED

Although a macro can be executed by any operator from any keyboard, it can only be executed by one person at a time. If the following message;

is displayed, then you must wait until the operator using that macro is finished.

NOTE: If a macro sequence is executed without having a monitor selected, no messages will be displayed.

4.3MAKE A NEW MACRO

,Access denied to some operators

Press the key followed by the key. The prompt:

will be displayed. Now, select the two-digit macro number you wish to create. Valid MACRO's are (00 Ù 99).

•for example, .. begins recording macro (65).

•or .. begins recording macro (00). The message prompt:

will then be displayed briefly.

Rev. A	4-3	HMXMU001056
		03/16/05