Honeywell MAXPRO-NET manual General

8.8GENERAL

	Message Prompt	Explanation
	No alarm present	You pressed the alarm clear key but there are no alarms currently
		displayed on this monitor.
	Busy-please wait	The MAXPRO-Net Server is updating the disk storage files with
		your scan sequence, user macro or other changes. This could
		take several seconds before normal control of the system is
		restored.
	Busy-using PTZ	Another keyboard/operator is controlling this PTZ camera.
	Busy-using VCR	Another keyboard/operator is controlling this VCR.
	Busy-using CTRL	Another keyboard/operator is controlling this device.
	Request PTZ	Another keyboard/operator (of lower priority) wishes to control this
		PTZ camera. Please hurry up and release control of this camera
		as soon as possible.
	Request VCR	Another keyboard/operator (of lower priority) wishes to control this
		VCR. Please hurry up and release control of this VCR as soon as
		possible.
	Request CTRL	Another keyboard/operator (of lower priority) wishes to use this
		device. Please hurry up and release control of this device as soon
		as possible.
	Press <menu> key	This keyboard is not signed-on yet. Press the <MENU> key to
		sign-on as a new operator. Pressing any other key on the
		keyboard will generate this message prompt.
	Printer <no paper>	The hard-copy status printer is out of paper. The printer paper
		must be replaced immediately to avoid loss of report information.
	Printer <off line>	The hard-copy status printer is off-line. Restore the printer to on-
		line immediately to avoid losing report information.
	Keyboard time-out	The keyboard has not been used for a period of time. It has now
		been forced away from the selected monitor to allow other
		operators to use that monitor. The keyboard is not signed off.
	Menu time-out	The system MENU was selected onto this monitor. As it was not
		used for the last 30 seconds, it has been cleared down to allow
		other operators to use the system MENU.
	Key disabled	This key on the keyboard has been disabled for this operator. The
		key function pressed is not available to you.
	Op (xx) signed-off	This prompt confirms that you have been signed-off the keyboard.
	Sign-on confirmed	This prompt confirms that you have been signed-on to this
		keyboard.
	No menu defined	No system MENU has been defined for this system configuration.
		The system MENU cannot be accessed.
	Monitor in use	The system MENU cannot be selected to a monitor while another
		keyboard is also selecting the same monitor. Move to a different
		monitor and try again.
Rev. A		8-8	HMXMU001056
			03/16/05