Cisco Systems R2001120402, UCS C200 M1 manual Replaceable Component Locations

Chapter 3 Maintaining the Server

Preparing for Component Installation

Replaceable Component Locations

This section shows the locations of the components that are discussed in this chapter. The view shown is from the top down, with the top cover, internal cable cover, and internal air baffles removed.

•Figure 3-6shows the Large Form Factor (LFF) version of the server.

•Figure 3-7 on page 3-12shows the Small Form Factor (SFF) version of the server.

Figure 3-6 Replaceable Component Locations, Large Form Factor (Top View)

7	9	10
8			11
6

5

4

3

2

1

195724

1	Hard drives (up to four, accessible through	7	Riser card assembly
	front bays)
2	Fan tray	8	PCIe card connector on riser card (with
			low-profile slot)
3	DIMM slots (up to 12)	9	Socket for trusted platform module (TPM)
4	CPUs and heatsinks (up to two)	10	Socket for mezzanine card
5	Motherboard CMOS battery	11	Power supplies (up to two, accessible through
			rear bays)
6	PCIe card connector on riser card (with
	standard-profile slot)

	Cisco UCS C200 Server Installation and Service Guide
OL-20732-02		3-11