Delta Electronics manual Configuration, Corresponding Relation between DVPDNET-SL and DVP-SV

DeviceNet Network Scanner DVPDNET-SL

„Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN rail.

„Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail, as shown below.

DVPDNET

DVP28SV

35mm DIN rail

RUN

STOP

3.3Connecting to DeviceNet Connection Port

„The colors on the PINs on the DeviceNet connection port match the colors of the connection cables. Make sure you connect the cable to the right PIN.

„We recommend you also apply Delta’s power module in the connection.

4 Configuration

4.1Corresponding Relation between DVPDNET-SL and DVP-SV

After all DVPDNET-SL are connected to DVP-SV, DVP-SV will distribute data mapping areas to every

DVPDNET-SL.

DVPDNET DVPDNET DVPDNET DVPDNET DVPDNET DVPDNET DVPDNET DVPDNET DVP28SV

RUN

STOP

The index of DVPDNET-SL is its number. The first DVPDNET-SL on the left hand side of DVP-SV is No. 1, the following DVPDNET-SL modules are No.2, No.3, No.4 and so on.

8 DVP-PLC Application Manual