Delta Electronics manual DeviceNet Network Scanner DVPDNET-SL

Page 18

DeviceNet Network Scanner DVPDNET-SL

(16)Confirm the parameters and I/O data in VFD-B and click on “OK”.

2.Configuration of DVPDNET-SL

(1)Double click on DNET Scanner (node 01), and the “Scan Module Configuration..." dialog box will appear. You can find the currently available nodes, RTU-DNET and VFD-B Drives 230V 3HP, in the list on the left side. On the right side, there is an empty “Scan List”.

(2) Move the slave devices on DeviceNet in the "Available Nodes” list on the left side to the "Scan List”on the right side. Select a node and click on > . Follow the steps to move all the nodes to the scan list.

16	DVP-PLC Application Manual

Image 18

Contents DVPDNET-SL Page Table of Contents Digital Indicator LED Principle of Bit-StrobeDisplay of Node Status in Scan List Status of DVPDNET-SL Features IntroductionI/O Scan List CanDimension Product Profile & OutlineShield DVPDNET-SL PINVDC Canl CanhInstalling DVPDNET-SL and DVP-SV MPU on DIN Rail Basic OperationIN1 Configuration Corresponding Relation between DVPDNET-SL and DVP-SVHow to Construct a DeviceNet Network Constructing DeviceNet NetworkI/O Mapping Table RTU-DNET COM1 DVP-SVAscii DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DVPDNET-SL Slave → DVPDNET-SL Register Devices in slave PLC program Sending Explicit Message from Ladder Diagram Principle of Explicit Message SendingMAC ID Node Address00 DeviceNet Node Address02 H0101 D6250 ReqID = 01, Command = DeviceNet Network Scanner DVPDNET-SL H0008 D6251 Port = 00, Size = Display of Node Status in Scan List Bit-Strobe CommandDisplay of Node Status on Network PLCLED Indicator & Trouble-shooting Power LEDMS LED NS LED MS LEDCorrection is needed Memo