Delta Electronics manual DeviceNet Network Scanner DVPDNET-SL

DeviceNet Network Scanner DVPDNET-SL

Item	Function	Default
DIDO Output	The digital output points shall be 8’s multiple. The number will
	be regarded as 8 when it is less than 8 and regarded as 16	N/A
Points (Y)
	when it is bigger than 8 but less than 16.
AIAO Module	The number of special modules connected to RTU-DNET.	N/A
Number	Range: 0 ~ 8
Diagnostic	The interval when RTU-DNET executes diagnosis. Range:	5 (sec)
Intervel Time	1~ 65 secs
IO Module	How RTU-DNET will react when the special module
	connected to it is offline. You can choose “Ignored”, "Alarm”	Alarm
Offine Treatment
	or “stop DeviceNet IO".
IO Module	How RTU-DNET will react when it detects errors. You can	Alarm
Error Treatment	choose “Ignored”, “Alarm” or “Stop DeviceNet IO”.
	For you to decide whether to add control word and status
	word to I/O data. When you choose not to do it, the I/O data
Add control word	in RTU-DNET and DeviceNet master will not include control	Not to add
and status word to
IO data	word and status word. If you choose to add them in, the I/O
	data in RTU-DNET and DeviceNet master will include control
	word and status word.

(13)Confirm all the configurations are correct and click on “Download” to download the configurations to RTU-DNET. After the download is completed, click on “OK”.

(14)After the configuration o f RTU-DNET is completed, you will return to the main page.

(15) Double click on VFD-B Drives (node 03), and the “Node Configuration…” dialog box will appear.

DVP-PLC Application Manual 15