Delta Electronics DVPDNET-SL manual COM1, Dvp-Sv, Ascii

Page 13

DeviceNet Network Scanner DVPDNET-SL

(3)Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud rate and communication format.

	Item	Function	Default
	COM Port	COM port on the PC to be used to	COM1
	COM Port	communicate with DVP-SV	COM1
		communicate with DVP-SV
	Address	Communication address of DVP-SV	01

	Baud rate	Communication speed between the PC and	9,600 (bps)
	Baud rate	DVP-SV	9,600 (bps)
		DVP-SV
	Data Bits	Communication protocol between the PC and	7

	Parity		Even Parity
	Parity	DVP-SV	Even Parity

	Stop Bit		1
	Stop Bit		1

	Mode	Communication mode between the PC and	ASCII
	Mode	DVP-SV	ASCII
		DVP-SV

Click on “OK” and return to the main page.

(4) Select “Network” => "Online”, and the “Select Communication Channel” dialog box will appear.

DVP-PLC Application Manual

11

Image 13

Contents DVPDNET-SL Page Table of Contents Principle of Bit-Strobe Digital Indicator LEDDisplay of Node Status in Scan List Status of DVPDNET-SL Introduction FeaturesCan I/O Scan ListProduct Profile & Outline DimensionVDC Canl DVPDNET-SL PINShield CanhBasic Operation Installing DVPDNET-SL and DVP-SV MPU on DIN RailIN1 Corresponding Relation between DVPDNET-SL and DVP-SV ConfigurationConstructing DeviceNet Network How to Construct a DeviceNet NetworkI/O Mapping Table RTU-DNET DVP-SV COM1Ascii DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DeviceNet Network Scanner DVPDNET-SL DVPDNET-SL Slave → DVPDNET-SL Register Devices in slave PLC program Principle of Explicit Message Sending Sending Explicit Message from Ladder DiagramMAC ID Node Address00 DeviceNet Node Address02 H0101 D6250 ReqID = 01, Command = DeviceNet Network Scanner DVPDNET-SL H0008 D6251 Port = 00, Size = Display of Node Status on Network Bit-Strobe CommandDisplay of Node Status in Scan List PLCPower LED LED Indicator & Trouble-shootingNS LED MS LED MS LEDCorrection is needed Memo