3M 1420EZ manual Read and Write Failures

Read and Write Failures

ERROR: When the Read and Write button is clicked, and iD-Markers are read with any of the above errors, the following error message may be displayed and the write process is stopped.

REMEDY: See appropriate remedy in Read Failures section above.

ERROR: If all the iD-Markers are read and written, but an iD-Marker failed in verification, is displayed in the Verify column for that iD-Marker. Clicking on the magnifying glass icon, displays the following error message dialog box.

REMEDY: Rewrite iD-Marker. If it fails again, remove it from the Dynatel™ 1420EZ Stand and replace with a different iD-Marker.

ERROR: If the value of Number of Markers in the Fixture box is not the same as the value of Markers Read box, then the following dialog box is displayed.

REMEDY: Identify the iD-Marker with the error, indicated by the, repeat the Read and Write operation. If it fails again, remove it from the Dynatel™ 1420EZ Stand and replace with a different iD-Marker and repeat operation.