3M 1420EZ manual Contents

Page 2

Contents

 

Safety Information

3

Intended Use

3

Introduction

4

Initial Set-up

4

Dynatel1420EZ Stand Assembly

4

Dynatel1420EZ Writer - Battery Installation

5

Dynatel1420EZ Writer - Keypad, Icon and Port Definitions

5

Dynatel1420EZ Writer Operation

6

DynatelPCTools Download and Installation

6

Dynatel1420EZ Writer – Country Set-up

6

Creating iD-Marker Templates using DynatelPCTools

7

Read/Write Tab Set-up in DynatelPCTools

7

Writing ID-Markers

9

Read or Read/Write iD-Markers

10

Read Only Button

11

Read and Write Button

12

Error and Warning Messages

14

Low Battery

14

Read Failures

14

Read and Write Failures

16

Total Number of Markers in Fixture Error

16

Permanently Lock Marker Data and Locked iD-Marker Errors and Warnings

17

Miscellaneous Errors

17

Specifications

19

Congratulations on your purchase of the 3MDynatelModel 1420EZ Writer. The Dynatel1420EZ Writer is designed to write up to ten 3MiD Ball Markers, ten iD Near Surface Markers or ten iD Disk Markers in one simple step. Information such as facility data, application data and other details can be read from and written to your PC with this fast and easy to use writing station. Thank you for your purchase of this state of the art iD- marker writing solution.

Statement of Conformity

“Hereby, 3M Company declares that this iD Marker writing product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.”

www.3m.com/market/telecom/access/conformity/

Statement of Intended Use

The 3MDynatel1420EZ Writer is designed and tested for use in writing 3MEMS 1400 Series iD Ball Markers, iD Near Surface Markers or iD Disk Markers. These 3M markers are used to identify buried utilities and structures. The products have not been tested or proven safe for other uses. The use of these products may be subject to licensing restrictions.

mWARNING

It is unlawful to operate this unit in any country with a configuration setting that is not specific to that country. In order to prevent the user from operating this unit with a configuration setting that is not specific to the country where it is operated, this unit is equipped with configuration software for installing country specific configurations. Please refer to the Dynatel1420EZ Writer – Country Set-up section in this manual.

2

78-9000-0120-3-A

Image 2
Contents 3M Dynatel 1420EZ Writer Contents Safety Information Intended UseInitial Set-up Dynatel 1420EZ Stand AssemblyIntroduction Dynatel 1420EZ Writer Battery Installation Dynatel 1420EZ Writer Keypad, Icon and Port DefinitionsClick the Initial Configuration button Dynatel 1420EZ Writer OperationCreating iD-Marker Templates using Dynatel PCTools Read/Write Tab Set-up in Dynatel PCToolsTemplate Section Writing iD-Markers Log Data SectionRead or Read/Write iD-Markers Read Only Button Read and Write Button Was Blank Marker Heading Written and verified Read Failures Error and Warning MessagesLow Battery 78-9000-0120-3-A Read and Write Failures Total Number of Markers in Fixture Error Miscellaneous Errors Specifications Dynatel 1420EZ WriterImportant Notice