Sharp FO-3150 operation manual Warranty

Page 2

WARRANTY

Facsimile Products

Congratulations on Your Purchase!

This Sharp product is warranted against manufacturing defects for a period of twelve (12) months from the date of original purchase.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.

This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin infestation, software, use of consumables other than those approved by Sharp, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim.

This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and remedies under any relevant legislation in the country of sale. However, to the extent permitted by such legislation, Sharp excludes any liability for any indirect or consequential damages arising from the purchase or use of the product.

To the extent permitted by law, Sharp excludes all implied warranties and conditions and where the product is one that is not normally required for personal, domestic or household use, Sharp limits its liability to the repair or replacement (at Sharp's option) of materials or workmanship which are found by Sharp to be defective.

For your reference, please enter the particulars of your purchase below and retain, with your purchase documentation.

Model No.

Serial No.

Date of Purchase

Place of Purchase

SPform046 (Dec2001)

FOR LOCATION ENQUIRIES WITHIN

AUSTRALIA

REGARDING YOUR LOCAL

SHARP APPROVED SERVICE CENTRE

CALL SHARP

LOCAL CALL: 1 300 135 022

FACSIMILE: (02) 9672 1210

WEB: www.sharp.net.au

SHARP CORPORATION OF AUSTRALIA PTY. LIMITED

A.B.N. 40 003 039 405

1 Huntingwood Drive, Huntingwood NSW 2148

Important Notice: This warranty applies only to products sold in Australia

Image 2
Contents FO-3150 Warranty Introduction Paper tray capacity Applicable telephone lineImportant safety information Page Table of Contents Troubleshooting Look at the Operation Panel Function key Resolution / Reception Mode keyCOPY/HELP key Speed Dial keyPoints to keep in mind when setting up InstallationUnpacking Checklist About condensationConnections Connecting the handsetConnecting the power cord Connecting the telephone line cord Comments Moving your fax and reconnectingAttaching the paper trays Installation Extension phone optional Installing the Toner Cartridge Installing the Toner Cartridge Resetting the toner counter Press Once TwicePress Resetting the drum counterPress Start Loading Printing Paper Loading Printing Paper Entering Your Name and Fax Number Enter your fax number by pressing the number keys max digits Press to return to the date and time displayPress once and 3 times Setting the Date and TimePress once and twice Enter a two-digit number for the day 01 to Example the 5 thEnter the year four digits Example 2004 Press Start to start the clockMode Setting the Reception ModeSetting the reception mode Speaker Volume AdjustmentPress Press or to select the desired volume level Ringer Select 1 second, or 3 to select no Beep lengthPress 1 to select 3 seconds, 2 to Transmittable Documents Size and weightSending Faxes Loading the Document Other restrictionsRemoving a document from the feeder Contrast settings Adjusting the Resolution and ContrastResolution settings Load the documents Press One or more times untilTo FINE, or To set it to Standard Changing the default resolutionPress To set the default resolution Sending a Fax by Normal Dialling Pick up the handset or press Listen for the dial toneThrough 99 are for Sending a Fax by Automatic DiallingSpeed Dial numbers If you know the Speed Dial number that Storing fax and phone numbers for automatic diallingRapid Keys Go to . If not, enter the desired two digit number Go to StepEditing and clearing auto-dial numbers Press For Edit or 2 for ClearPress Start Make the desired changes to the name Using a Rapid Key for a voice call Rapid Key DiallingPress and then enter the 2-digit Speed Dial number Using a Speed Dial number for a voice callSpeed Dialling Repeat StepIf you are sending a fax, load the documents If desired, press To set Resolution and/or contrastSearching for an auto-dial number Until the name of the other party appearsSending a fax by Direct Keypad Dialling Redial Automatic rediallingSelect no Error Correction ModePress 1 to select YES, or Cover Sheet Press To select YES, or 2 toDial the receiving fax machine and send the fax Header messagePress Press a number key to select a message Batch Page Numbering Feeder or pressBroadcasting Sending a Fax to Multiple Destinations Press to store the destinationPress the appropriate Group Key Broadcasting using a Group KeyWhen you are ready to begin transmission, press Start Transmission will beginPress To clear a Group Key Storing numbers in Group KeysPress To program a Group Key When you have finished storing the destinations, press Start If the memory becomes full Using TEL/FAX Mode Receiving FaxesEnter a number as follows for the desired duration Using A.M. ModePseudo Ring Duration for Tel/Fax Mode To select A.M. mode, pressUsing FAX Mode Changing the number of ringsNumber from 2 to Using TEL ModeEnter the desired number of rings any Example 3 ringsAnswering with the fax’s handset Answering on an extension phone connected to the same linePutting a call on hold Press To turn on the function, or Optional Reception SettingsFax Signal Receive To turn it offFrom 0 to Changing the number for remote fax activationEnter the desired number any number ExampleSelect 100% Reception RatioPress To select AUTO, or 2 to Substitute Reception to Memory Load the documents face down. Maximum of 20 A4 pages Select any of the following copy settings as neededMaking Copies If Memory is Full appears When you are ready to begin copying, pressCopy Cut-off Connecting an Answering Machine Answering Machine ConnectionChanging the outgoing message Using the Answering Machine ConnectionSet the reception mode to A.M Set your answering machine to auto answerQuiet Detect Time Optional A.M. Mode SettingsHow answering machine mode operates To turn off the function Times Press OnceEnter a number from 01 to 10, or enter Example 3 secondsEnter a 2-digit number from 01 to For the number of seconds of the delayQuiet Detect Start Time Or enter 00 to turn off the functionOn A.M. Failure Press 1 to turn on the function, orDistinctive Ring Requires Subscription to Service Special FunctionsDistinctive Ring Requires Subscription to Service Blocking Reception of Unwanted Faxes Enter the fax number maximum of 20 digits Press StartEditing and clearing anti junk numbers Press 1 for Edit or 2 for ClearAs a polling key Polling Requesting a Fax TransmissionPress To use Rapid Key 08/POLL To turn off the polling function, pressRequesting transmission Being polled Memory pollingPress To select SET Set the reception mode to FAX pressLoad the document Until the arrowClearing a memory polling document Press To select Clear Press Start to clear the documentPolling security Storing fax numbers for polling permission Editing and clearing polling permission numbers Press For Edit or For ClearPress or until the desired list appears in the display Once Printing ListsActivity Report Press Start to print the listGroup List Setup ListTelephone Number List Transaction Report Headings in the Transaction ReportTransaction Report print condition Auto print-out of Activity Report Press 1 to turn on auto print out, orClose the operation panel MaintenanceScanning glass and rollers Housing Replacing the toner cartridgeReplacing the drum cartridge Replacing the drum cartridgeViewing the total number of pages printed Maintenance Maintenance Cleaning the drum cartridge Maintenance Line error TroubleshootingProblems and Solutions Problem SolutionDialling and transmission problems Trouble- shootingReception and copying problems General problems Transmittable Documents onAnswering machine connection Messages and Signals Display messages102 Audible signals Printer ErrorClearing Paper Jams Clearing a jammed documentClearing jammed printing paper 105106 Gently pull the jammed paper out of the machine107 Quick Reference Guide Receiving FaxesIndex 109110 Page Page Sharp Corporation