Sharp FO-3150 Optional A.M. Mode Settings, How answering machine mode operates, Quiet Detect Time

Optional A.M. Mode Settings

Note: If your answering machine has a remote retrieval function, make sure the code used to activate remote retrieval is different from the code used to activate fax reception with an extension telephone (see page 62). If they are the same, entering the code from an outside telephone to retrieve messages will cause the fax machine to be activated.

How answering machine mode operates

While you are out, all of your incoming calls will be answered by your answering machine and its outgoing message will play. Voice callers can leave a message. During this time, your fax will quietly monitor the line. If your fax detects a fax tone or a duration of silence greater than four seconds, it will take over the line and begin reception.

♦If the connection is not good or there is noise on the line, the answering machine and/or fax machine may not respond properly.

♦The call counter on your answering machine may indicate that voice messages were received, when only fax messages were received.

♦To prevent the fax from taking over the line and beginning reception if you

call in from an external phone or answer on an extension phone, press any three keys (other than the code to activate fax reception, "5", "*", and "*") on the dial pad of the phone. This can only be performed from a phone capable of tone dialling.

When you return and turn off your answering machine, be sure to change the reception mode back to FAX, TEL, or TEL/FAX mode!

Answering	Machine
5.

Optional A.M. Mode Settings

If necessary, you can use the following settings to improve the response of the answering machine connection to incoming calls.

Quiet Detect Time

This function causes the fax machine to take over the line and begin reception if a certain duration of silence is detected after the answering machine answers.

69