Sharp AR-FX13 appendix Messages and Signals, Display Messages, Audible Signals

Page 94

MESSAGES AND SIGNALS

DISPLAY MESSAGES

Message

Cause and remedy

Page

FRONT OR SIDE COVER OPEN.

The cover is open. Close the cover.

See the

CLOSE COVERS.

 

 

 

OPERATION

CLOSE THE SPF/RSPF COVER.

The RSPF cover is open. Close the RSPF cover.

MANUAL

 

 

CLEAR PAPER JAM.

A paper misfeed has occurred. Remove the misfeed as

(for general

SPF/RSPF JAM.

explained in "MISFEED REMOVAL". (See the OPERATION

information)

MANUAL (for general information).)

 

 

 

 

 

 

MEMORY FULL

The memory is full.

61

LOAD XXX PAPER

The setting for the printing paper size is incorrect. Set it

 

correctly. In the area labeled "XXX," "8.5x11" "8.5x14" or "A4"

29

INTO TRAYX.

will appear.

 

 

 

 

 

 

 

Paper tray is not set to the appropriate paper size. Change the

 

NO XXX SIZE TRAY

paper size setting of the paper tray to the size indicated in the

 

message, and load that size of paper in the paper tray.

-

CHANGE TRAY SETTING

"8.5x11", "8.5x14", or "A4" will appear in "XXX" in the

 

 

 

 

message.

 

 

 

 

AUDIBLE SIGNALS

Sound Type

Duration

Meaning

Continuous tone

3 seconds

Indicates the end of transmission, reception, or line error.

 

 

 

Continuous tone

1 second

Warning tone

90

Page 93 Page 95
Image 94
Page 93 Page 95
Contents
AR-FX13 Telecommunication Line cable Important safety information Page Table of Contents HOW to USE the FAX Function TWO-SIDED Reception AR-M201 onlyUsing the Rspf p.51 Using the document glass p.52 Memory transmission mode Direct transmission modeQuick Reference Guide Dialing methods Sending a faxSending a fax to multiple destinations Broadcasting p.70 Selecting the reception modeTo set up a timer transmission, see Timer Operations p.78 Storing a fax job while another job is in progressList of FAX Functions Menu item Settings factory default setting appears in bold Hour SECAuto M. Mode Select a setting or enter information Selecting Settings for the FunctionPress the Mode Select key to select fax mode Press the Menu keyConnections Connecting the Telephone Line CordFor other countries Online Manual on the CD-ROM Connecting Other DevicesFinal Preparations CommentsBypass tray Part NamesRspf Option Following illustration shows the part names of the AR-FX13Resolution key Memory key / indicatorReception Mode key Shift key / indicatorRspf indicator Line Status indicatorMode Select key / Mode indicators Error indicatorExample Using the Arrow KeysAdjusting the Beep Volume Pressed, the item is selected or enteredPress the key or key to set the ringer volume Adjusting the Ringing Volume18RINGER Volume Press the Menu key Press the OK key17BEEP Length Selections are as follows 13SEC19BEEPER Volume Press the key or key to set the alarm volumeFAX Setup HOW to Enter CharactersEntering Your Name and FAX Number 2ENTRY Mode3OWN Passcode SET 2DATE&TIME SET Setting the Date and TimePress the OK key Press the Menu key Ange Datum 2008- 02/01/2008Press the key or key to select 112HOUR or 224HOUR 21DATE&TIME Format1TIME Format Selection Exit2DATE Format Selections are as follows 1MMDDYYYY 2DDMMYYYY 3YYYYMMDD5DAY Light Saving Daylight Saving Time SettingFollow these steps to enable Daylight Saving Time Press the key or key to select 1ON or 2OFFDirect transmission the Memory indicator is off Selecting the Transmission ModeMemory transmission the Memory indicator is lit Transmission takes place as follows in each modeSelecting the Reception Mode Press a numeric key to select the number of rings Setting the Number of Rings for Auto Reception# of Rings Auto Select the number of rings you would like to use 0 to# of Rings Manual Selecting the Reception Paper SizeSelect the number Rings you would like to Use 0 to 24TRAY Selection Setting the Tray SelectionPress the key or key to select the tray selection 8RECALL Times Busy Setting the Number of Recall TimesWhen the line is busy Press the Menu key to ExitWhen a communication error occurs 9RECALL Times ERRPress the numeric keys to select the recall interval Setting the Recall Interval10RECALL INT. Busy Selected11RECALL INT. ERR Enter the recall interval 00 toSetting the Index Function 20INDEX Print3RESO. Priority Setting Resolution PriorityPress the key or key to select the transmission resolution Selections are as follows 1STANDARD15FAX Signal RCV Setting UP the Machine for USE with a PC ModemPress the Menu key.5 Press the OK key 14REMOTE Reception Using the Remote Reception FunctionTurning on Remote Reception 13FAX Remote Number Setting a Fax Remote NumberPress a numeric key to enter the Fax Remote Number PBX setting PBX Setting22PBX Setting 1FAX Number Storing Numbers for Automatic DialingStoring numbers Enter the fax number with the numeric keysPress the key or key to select a Chain Dial setting Enter the name of the destination with the numeric keysReturn to to clear Another number Use the following procedure to clear numbers2CLEAR Press the Menu key a number of times until you exit3GROUP KEY Storing Numbers Under Group KeysEnter the numbers that you wish to store in the Group Key Numeric keys as Described in HOW to Enter a name for the Group Key with the numeric keysReturn to to program another Group key 2END Enter the numbers that you wish to deleteTo exit, press the key or key to select 2END Deleting numbers from Group KeysQuiet Detect Time Using the Machine with AN Answering MachineTo 10. setting 00 turns 2 off Quiet Detect Time 1QUIET Detect TimeIf Quiet Detect Time is not working properly Answering Machine Backup2AUTO Receive When using the document glass Size and WeightWhen using the Rspf Originals Suitable for FaxingUnsuitable Originals Setting the Original Sending OriginalsGently close the Rspf Press the # key1DOC. Glass Size Optional Transmission SettingsOriginal Size Press the key or key to select the original sizeResolution Contrast1COVER Sheet SET Cover SheetPress the Cover Sheet key Press the OK key One of five messages can also be added to the cover sheetPress the key or key to select a message Message Function2TX Message SET If you do not wish to add a message, select 1NO MessageTWO-SIDED Original Transmission Function Press the 2-SIDED TX key until the desired setting appearsTo cancel this function, select OFF Place the originals in the RspfRapid KEY Dialing Dialing and TransmittingDirect Keypad Dialing Speed DialingChain Dialing Normal Dialing Using the Speaker KEYTo adjust the volume, press the left and key or key Dial the fax number of the receiving machineRedialing Using the Search KEYPress the REDIAL/PAUSE key Press the Start key If the Memory Becomes Full While Scanning AN Original Canceling Deleting a Stored FAX JOB3MEMORY Status Using A.M. Mode Using Auto ModeUsing MAN. Mode Receiving FaxesOptional Reception Settings Sided RX Press the key or key to select 1ON or 2OFFReceive Reduce 16RCV ReduceWhen Using Manual Sending and Receiving Memory Substitute Reception into Memory2FAX Number Data Transfer0RX Data Transfer Digits by pressing Numeric keysFollow these steps to use the fax transfer function 1DATA Transfer1YES If not Stored FW.# appearsAdjust the resolution and/or contrast settings if desired Transmission ReservationPress the Broadcast key Press the OK key BroadcastingTransmission will begin Broadcasting using a Group key Press the appropriate Group key. Transmission will beginPolling 8POLLING ModePolling Follow these steps to use the polling functionSerial Polling 9SERIAL Poll ModeFollow these steps to use the serial polling function 7MEMORY Poll Mode Setting up polling transmissionPolling Transmission Memory Polling Adding a original to polling memory Deleting originals from polling memory1ON Restricting Polling Machines Polling SecurityPress the key or key to select 1ON 11SECURITY SelectTo delete a passcode number 4PASSCODE # ModeProgramming/deleting passcode numbers Select 2CLEAR and press the OK key1TIMER Mode Timer OperationsPress the key or key to select 1SET Canceling a Timer Transmission JOB 5ANTI Junk FAX Anti Junk FAX1ANTI Junk Select To store junk fax numbers, use the following procedure If you wish to store another fax number, return to stepTo clear junk fax numbers, use the following procedure Operation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports You can print out a list of group dialing numbersPasscode List Fax numbers designated as Anti Junk Fax numbers Use the following procedure to print out reports Currently activated User Program settings Press the Report key Press the OK key 6AUTO Listing Activity Report Auto ListingPress the key or key to select 1ON and press the OK key Printing Transaction Reports 7PRINT SelectionTroubleshooting Audible Signals Messages and SignalsDisplay Messages Specifications Index Reports Reception modeTransmission mode Storing numbersFaxes, sending and receiving Fax setupStoring/settings Sending originalsMemo Memo Memo Sharp Electronics Europe GmbH AR-FX13v1
Top Page Image Contents