Brother 660MC, 580MC Programming a Fax Forwarding Number, Fwd#, Programming Paging Number

PAG#:

ENTER & SET

Programming a Fax Forwarding Number

1 Press Function/Set, 8, 6.

2 Press or until the LCD displays FAX FORWARD? and press

Function/Set.

3	Enter the number of the fax machine where	FWD#:
	faxes will be forwarded (up to 20 digits) and	ENTER	& SET
	press Function/Set.
4	Press Stop to exit.

You can change a Fax Forwarding number remotely. (See page 9-11.)

You can not use Paging and Fax Forwarding at the same time.

Programming Paging Number

1 Press Function/Set, 8, 6.

2 Press or until the LCD displays PAGING? and press Function/Set.

3 Enter your pager phone number (up to 20 digits) followed by # # and press Function/Set. Do not include the area code if it is the same as that

of your FAX/MFC. For example, 1 8 0 0 5 5 5 1 2 3 4 # #.

4

5

If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your FAX/MFC telephone number, then press # # and press Function /Set. For example,

1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.

— OR—

If you do not need a PIN, press Redial/Pause, enter the telephone number of your FAX/MFC, then press # # and press Function/Set. For example, Redial/Pause 1

8 0 0 5 2 1 2 8 4 6 # #.

Press Stop to exit.

You can not change a Paging number or PIN remotely.

9 - 7 M E S S A G E C E N T E R