Actiontec electronic V.90 manual Configuring Windows 95 OEM SR2

Page 11

Step 5 Click OK to copy the Wave Device .INF file from the A:\ drive to the hard drive.

Step 6 To determine what COM port and IRQ is assigned to the modem in Win- dows 95, click on the Modems icon in Control Panel and select the Diagnostic tab. Click on the COM Port icon and then on the More Info button to view the modem properties.

CONFIGURING WINDOWS 95 OEM SR2

Step 1 Upon start-up, Windows 95 detects the modem and launches the Update Device Driver Wizard dialog box. Insert the diskette (or CD-ROM) containing the modem’s .INF files and click Next >.

Step 2 After Windows 95 has found the updated drivers for your modem, click Finish.

Step 3 If Windows asks for an installation disk, click OK and type A: (or the CD-ROM drive letter) in the dialog box that appears and click OK.

Step 4 After the Wizard has copied the .INF files to the hard disk, it should detect “Wave Device for Voice Modem” and prompt for its driver. Click Next>.

Step 5 Click Finish to copy the Wave Device .INF file from the A:\ drive (or CD-ROM) to the hard drive.

Step 6 To determine what COM port and IRQ is assigned to the modem in Win- dows 95, click on the Modems icon in Control Panel and select the Diagnostics tab. Select your modem and then click on the More Info button to view the modem properties.

Step 7 Remember this COM port number. When you install your Data/Fax soft- ware or internet browser program, you may need to set your softwares modem port location to this same number.

CONFIGURING WINDOWS 98

Step 1 Turn on the computer and load Windows 98. Windows 98 will detect new hardware and start building the driver database.

Step 2 An Add New Hardware Wizard should appear. Insert the installation

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Table of Contents Do This First For Windows 3.1 InstallationWin95 Modems Properties Panel For Windows 95/98 InstallationPage Page Jumper Settings Installing The ModemJP2 IRQ interrupt request Options Hardware InstallationPage Configuring Windows Connecting Devices to the ModemConfiguring Windows 95 OEM SR2 Diskette or CD-ROM into the appropriate drive. Click Next Configuring Windows NTPage Full-Duplex Speakerphone Installing and Configuring Communications SoftwareData TIA/EIA-602 Fax TIA/EIA-578 for Class 1 Fax Voice Check Modem Properties TroubleshootingModem Diagnostics Page Common Problems No Dialtone Error Page To display the value of an S-register Appendix a AT Command Set+++ATCR RegistersRepeat Last Command On-line character echo disabled. default Disables echo to the computerEnables echo to the computer default On-line Data Character Echo CommandReturn On-line to Data Mode Monitor Speaker ModeThis command turns the speaker on or off Speaker is off Speaker is always on when modem is off-hookConnect result code reports DTE speed Displays result codes as text defaultResult Code Option Connect result code reports DTE modem to computer speedData Set Ready DSR Option M0 Modem only supports asynchronous mode.defaultQ0 Modem only supports asynchronous mode This command selects DSR action S0 DSR always on defaultSelect Stored Profile On Power-UP Modulation Selections Escape Character Page Default 50 1 second S25 Detect DTR Change FCC Part 68 Requirements Appendix B Communications RegulationsFCC Regulations Declaration of Conformity Requirements for End Users Canadian Department of Communications Cdoc
Top Page Image Contents