Actiontec electronic V.90 manual Select Stored Profile On Power-UP

&S1: DSR comes on when establishing a connection and when carrier is lost.

&Vn View Active Configuration and Stored Profile

This command is used to display the active profiles.

&V0: View stored profile 0.

&V1: View stored profile 1.

&V3: View relay and general-purpose input-output status.

&Wn Store Current Configuration

This command stores certain command options and S-register values into the modem’s nonvolatile memory. The ATZ command or a power-up reset of the mo- dem restores this profile.

&W0: Store in user profile 0.

&W1: Store in user profile 1.

&Yn Select Stored Profile On Power-UP

This command selects user profiles on power-up:

&Y0: Recall stored profile 0 on power-up

&Y1: Recall stored profile 1 on power-up.

&Zn=x Store Telephone Number

This command is used to store up to four dialing strings in the modem’s nonvola- tile memory for later dialing. The format for the command is &Zn = ”stored num- ber” where n is the location 0-3 to which the number should be written. The dial string may contain up to 30 digits. The ATDS = n command dials using the string stored in location n.

%En Auto-Retrain Control

This command enables-disables auto-retrain:

%E0: Disables auto-retrain.

%E1: Enables auto-retrain (default)..

%Gn Rate Renegotiation

This Command enables-disables rate-renegotiation.

26