Allied Telesis AT-CV5000 manual LED Interface Card

AT-CV5000 Media Converter Chassis Installation Guide

LED Interface Card

The LED interface card, as shown in Figure 5, is preinstalled in the AT-CV5000 chassis and is not field-replaceable. The LED interface card features the following components:

ˆOne RS-232 terminal port with a DB-9 connector

ˆOne recessed RESET LINE/EXP button

ˆSeven system status LEDs

RS-232 Terminal Port

Recessed RESET LINE/EXP Button

AT-
CV5LED
RDY	MS
FAN1	TR F	LT
PS1
PS-A	PS-B
RDY

.REARSSLOT

CONSOLE

RESET		LINE/EXP
FAN-A	F
		AN-B

Status LEDs

RS-232 Terminal Port

251

Figure 5. LED Interface Card Components

You can use the RS-232 terminal port on the LED interface card to establish a local connection to any module present in the expansion slot located in the rear of the chassis.

Note

This terminal port does not connect to any AT-CV5M01 Management Card in the chassis. Each AT-CV5M01 Management Card contains its own RS-232 terminal port, as shown in Figure 6 on page 24.

The RS-232 terminal port on the LED interface card has a DB-9 female connector and uses a straight-through RS-232 cable (not provided). The default settings for the RS-232 terminal port are:

ˆBaud rate: 115200 (range 2400 to 115200 bps)

21