Chapter 2: Installation
connector is connected to the receiver connector on the remote node.
Transmitting 
Fiber
Connector
TX 1 RX
Receiving
Fiber
Connector
Figure 27. Dual SC Port
To connect a fiber optic cable to a dual SC connector, perform the following procedure:
Warning: Class 1 Laser product. L1
Warning: Do not stare into the laser beam. L2
1.Remove the dust cover from the fiber optic port, as shown in Figure 28.
T
X 
M
M
R 
X 
LK | AT | FD |
|
| |
T |
|
|
X |
|
|
284
Figure 28. Removing the Dust Cover from a Dual SC Fiber Optic Port
2.Connect the appropriate optical cable to the port, as shown in Figure 29.
LK | AT |
|
|
| T |
|
| X |
|
| M |
|
| M |
|
| R |
|
| X |
LK | AT | FD |
|
|
285
Figure 29. Connecting to the Dual SC Fiber Optic Port
3.Connect the other end of the optical cable to the link partner.
4.Power ON the end nodes.
56