Allied Telesis AT-MC601 manual DC Power Supply Input Port External AC/DC Power Adapter

Page 16

DC Power

Supply Input

Port

External AC/DC Power Adapter

AT-MC601, AT-MC602 Installation and User’s Guide

Table 5 lists the management cable connector pins and their signals.

Table 5 Management Cable Pinouts

RS-232 Pin	DIN Pin	Signal


1	1	Not Used

2	2	TXD

3	8	RXD

4	5	DSR

5	6	GND

6	3	DTR

7	4	CTS

8	7	RTS

9	(N/A)	Not Used

The network extender has a single DC power supply socket on the back panel. The unit does not have a power switch. To turn the network extender ON or OFF, you connect or disconnect the power cord.

An external AC/DC power adapter is included with the network extender for desktop or wall-mount operation. The power adapter supplies 12V DC to the network extender. Allied Telesyn supplies an approved safety compliant AC power adapter specifically designed for each region the network extender is sold. Each type of power adapter has an unregulated output of 12V DC at 1A.

16

Image 16

Contents Installation and User’s Guide Page Electrical Safety and Emission Statement Contents Appendix a Preface How This Guide is OrganizedDocument Conventions Contacting Allied Telesyn Technical Support Summary of Features Product DescriptionOverview Ethernet Port AT-MC601 Subscriber Unit AT-MC602 ProviderLocation of Components AT-MC601Hardware Features Pin AssignmentPstn Port 10/100 Mbps Twisted Pair Ethernet Port Pin MDI Signal MDI-X Signal TX+ RX+Management Cable Color Description10/100Base-TX Port Line PortDC Power Supply Input Port External AC/DC Power Adapter RS-232 Pin DIN Pin SignalSoftware Features Installation Installation Safety Precautions Additional Compliance Statements Selecting a Site for the Network Extender Cables Port Connector Cables Not IncludedUnpacking the Network Extender Using Subscriber Unit On a Desktop Installing the AT-MC601 Subscriber UnitWall-Mounting Subscriber Unit Positioning The Switch Onto The Wall Screws Pstn to Telephone Powering On the Subscriber Unit MCRInstalling the AT-MC602 Provider Unit Using the Provider Unit on a DesktopWall-Mounting Provider Unit Grounding the Provider Unit Rack-Mounting Provider Unit Rack Mount Set in RackInternet Service Provider Provider UnitPowering On the Provider Unit Warranty Registration Configuration Starting a Configuration Session Downloading Software Updates Cabling PreparationsOpening Configuration Software Configuring the Provider Unit ConfigurationUpstream/Downstream Actual MbpsMin Mbps Max MbpsApply AboutSNR of Received Signal Corrected RS errors /sMean Square Error Full Constellation LinkSignal Detected Reduced Constellation LinkTC Synchronized Ethernet Encapsulation SyncError Counters TxRx CountersCollision Counters ClearStop/Start Install Configuring the Subscriber UnitNormal AT-MC601, AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Cant read link status AT-MC601, AT-MC602 Installation and User’s Guide Default Configuration Settings Technical Specifications Physical SpecificationsSafety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Temperature of 40 degrees C Lightning DangerGefahr Durch Blitzschlag Umgebungstemperatur von nicht mehr als 40 C entworfenLovgivning for elektriske installationer Fare Under UvejrMaksimum 40 grader C 10Gevaar Voor Blikseminslag VeiligheidBedragen dan 40 graden Celsius Ambiante maximum de 40 degrés Celsius Salamaniskuvaara 40 CPericolo Di Fulmini Ambientale massima di 40 gradi centigradiFare For Lynnedslag SikkerhetPå 40 grader celsius Perigo De Choque Causado Por Raio Ambiente máxima de 40 graus centígradosPeligro De Rayos Temperatura ambiental máxima de 40 grados CFara För Blixtnedslag Grader Celsius