Allied Telesis AT-MC601 manual Unpacking the Network Extender

Installation

Unpacking the Network Extender

To unpack the network extender:

1.Remove all components from the shipping package and store the packaging material in a safe location.

Note

You must use the original shipping material if you need to return the unit to Allied Telesyn.

2.Place the network extender on a level, secure surface.

3.Make sure the following hardware components are included in your network extender package. If any item is missing or damaged, contact your Allied Telesyn sales representative for assistance.

❑One AT-MC601 or AT-MC602 Network Extender

❑Four protective feet

❑Two Phillips-head screws for wall-mounting

❑Two plastic anchors for wall-mounting

❑One cable lug

❑One M4 x 8mm screw

❑One power adapter

❑One management cable (provided for AT-MC602 model only)

❑Documentation and configuration software CD

❑Warranty and registration card

23