Installing the AT-MC602 Provider Unit
Using the Provider Unit on a Desktop
The
Warning
To prevent exposure to electric shock, the
Note
For Finland, Norway, and Sweden – When the
For installation instructions of this ground conductor, refer to the AT- MCR12 Media Converter Rackmount Chassis Installation Manual (PN
To use the Provider unit on a desktop, perform the following procedure:
1.Remove all equipment from the package and store the packaging material in a safe place.
2.Attach the four protective feet (provided) to each corner of the bottom of the unit, as illustrated in Figure 6.
LINK ERR
PSTN
LINE
ETHERNET EXTENDED VDSL
MGMT
PWR
ACT
LINK
100BaseTX 10BaseT/
Figure 13 Attaching Protective Feet to the Provider Unit
28