Allied Telesis AT-MC601 Wall-Mounting Provider Unit, Positioning The Switch Onto The Wall Screws

Page 29

Installation

Wall-Mounting

the Provider

Unit

The Provider unit can be mounted onto a wall using the keyholes on the bottom of the unit. The screws and plastic anchors used for mounting the unit are provided.

To wall-mount the Provider Unit, perform the following procedure:

1.If attached, remove the protective feet, data cables, and power cord from the unit.

2.Select a wall location for the device.

3.Install the screws and plastic anchors onto the wall, as shown in Figure 7.

LINK
ERR	PSTN
	LINE

ETHERNET MGMT

ED	VDSL	MC602-AT
		MC602-AT
		PWR
		ACT
	LINK
	100BaseTX
10BaseT/

Figure 14 Installing the Screws and Plastic Anchors Onto The Wall

4.Position the switch onto the wall screws so that the ports are facing the ceiling, as shown in Figure 8.

-MC602 AT

Figure 15 Positioning The Switch Onto The Wall Screws

29

Image 29

Contents Installation and User’s Guide Page Electrical Safety and Emission Statement Contents Appendix a How This Guide is Organized PrefaceDocument Conventions Contacting Allied Telesyn Technical Support Product Description Summary of FeaturesEthernet Port AT-MC601 Subscriber Unit AT-MC602 Provider OverviewAT-MC601 Location of ComponentsPin Assignment Hardware FeaturesPstn Port 10/100 Mbps Twisted Pair Ethernet Port TX+ RX+ Pin MDI Signal MDI-X SignalColor Description Management Cable10/100Base-TX Port Line PortRS-232 Pin DIN Pin Signal DC Power Supply Input Port External AC/DC Power AdapterSoftware Features Installation Installation Safety Precautions Additional Compliance Statements Selecting a Site for the Network Extender Cables Not Included Cables Port ConnectorUnpacking the Network Extender Wall-Mounting Subscriber Unit Installing the AT-MC601 Subscriber UnitUsing Subscriber Unit On a Desktop Positioning The Switch Onto The Wall Screws Pstn to Telephone MCR Powering On the Subscriber UnitUsing the Provider Unit on a Desktop Installing the AT-MC602 Provider UnitWall-Mounting Provider Unit Grounding the Provider Unit Rack Mount Set in Rack Rack-Mounting Provider UnitProvider Unit Internet Service ProviderPowering On the Provider Unit Warranty Registration Configuration Downloading Software Updates Cabling Preparations Starting a Configuration SessionOpening Configuration Software Configuration Configuring the Provider UnitActual Mbps Upstream/DownstreamMin Mbps Max MbpsAbout ApplyCorrected RS errors /s SNR of Received SignalMean Square Error Full Constellation LinkReduced Constellation Link Signal DetectedTC Synchronized Ethernet Encapsulation SyncTxRx Counters Error CountersCollision Counters ClearStop/Start Normal Configuring the Subscriber UnitInstall AT-MC601, AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Cant read link status AT-MC601, AT-MC602 Installation and User’s Guide Default Configuration Settings Physical Specifications Technical SpecificationsSafety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Lightning Danger Temperature of 40 degrees CUmgebungstemperatur von nicht mehr als 40 C entworfen Gefahr Durch BlitzschlagFare Under Uvejr Lovgivning for elektriske installationerMaksimum 40 grader C 10Bedragen dan 40 graden Celsius VeiligheidGevaar Voor Blikseminslag Ambiante maximum de 40 degrés Celsius 40 C SalamaniskuvaaraAmbientale massima di 40 gradi centigradi Pericolo Di FulminiPå 40 grader celsius SikkerhetFare For Lynnedslag Ambiente máxima de 40 graus centígrados Perigo De Choque Causado Por RaioTemperatura ambiental máxima de 40 grados C Peligro De RayosGrader Celsius Fara För Blixtnedslag