Allied Telesis AT-MC601 manual Lightning Danger, Temperature of 40 degrees C

Page 55

Translated Electrical Safety and Emission Information

Standards: This product meets the following safety standards.

1

RFI Emission

EN55022 Class A, FCC Part 15 Class A

2

Immunity

EN55024

3

Electrical Safety

EN60950, UL60950, FCC Part 68

 

Safety

 

4

Only use the power adapter supplied with the extender.

 

The AT-MC602 can be installed stand alone or can be inserted in the AT-MCR12

 

chassis. In the last case, the AT-MC602 does not need the power adapter.

5

Caution: Power cord is used as a disconnection device. To de-energize equipment

 

disconnect the power cord.

 

6

Lightning Danger

 

 

Danger: Do not work on equipment or cables during periods of lightning activity.

7 Do not block air vents.

8 Do not connect a telephone line into the signal connector.

9

Operating Temperature: This product is designed for a maximum ambient

 

temperature of 40 degrees C.

10 All Countries: Install product in accordance with local and National Electrical Codes.

55

Image 55
Contents Installation and User’s Guide Page Electrical Safety and Emission Statement Contents Appendix a How This Guide is Organized PrefaceDocument Conventions Contacting Allied Telesyn Technical Support Product Description Summary of FeaturesEthernet Port AT-MC601 Subscriber Unit AT-MC602 Provider OverviewAT-MC601 Location of ComponentsPin Assignment Hardware FeaturesPstn Port 10/100 Mbps Twisted Pair Ethernet Port TX+ RX+ Pin MDI Signal MDI-X SignalLine Port Management CableColor Description 10/100Base-TX PortRS-232 Pin DIN Pin Signal DC Power Supply Input Port External AC/DC Power AdapterSoftware Features Installation Installation Safety Precautions Additional Compliance Statements Selecting a Site for the Network Extender Cables Not Included Cables Port ConnectorUnpacking the Network Extender Using Subscriber Unit On a Desktop Installing the AT-MC601 Subscriber UnitWall-Mounting Subscriber Unit Positioning The Switch Onto The Wall Screws Pstn to Telephone MCR Powering On the Subscriber UnitUsing the Provider Unit on a Desktop Installing the AT-MC602 Provider UnitWall-Mounting Provider Unit Grounding the Provider Unit Rack Mount Set in Rack Rack-Mounting Provider UnitProvider Unit Internet Service ProviderPowering On the Provider Unit Warranty Registration Configuration Downloading Software Updates Cabling Preparations Starting a Configuration SessionOpening Configuration Software Configuration Configuring the Provider UnitMax Mbps Upstream/DownstreamActual Mbps Min MbpsAbout ApplyFull Constellation Link SNR of Received SignalCorrected RS errors /s Mean Square ErrorEthernet Encapsulation Sync Signal DetectedReduced Constellation Link TC SynchronizedClear Error CountersTxRx Counters Collision CountersStop/Start Install Configuring the Subscriber UnitNormal AT-MC601, AT-MC602 Installation and User’s Guide Troubleshooting Communication Error Message Cant read link status AT-MC601, AT-MC602 Installation and User’s Guide Default Configuration Settings Physical Specifications Technical SpecificationsSafety and Electromagnetic Compatibility Certifications Translated Electrical Safety and Emission Information Lightning Danger Temperature of 40 degrees CUmgebungstemperatur von nicht mehr als 40 C entworfen Gefahr Durch Blitzschlag10 Lovgivning for elektriske installationerFare Under Uvejr Maksimum 40 grader CGevaar Voor Blikseminslag VeiligheidBedragen dan 40 graden Celsius Ambiante maximum de 40 degrés Celsius 40 C SalamaniskuvaaraAmbientale massima di 40 gradi centigradi Pericolo Di FulminiFare For Lynnedslag SikkerhetPå 40 grader celsius Ambiente máxima de 40 graus centígrados Perigo De Choque Causado Por RaioTemperatura ambiental máxima de 40 grados C Peligro De RayosGrader Celsius Fara För Blixtnedslag