AC International MTA128ST-USB manual Features

MultiModemISDN User Guide

Features

The MTA128ST-USB communicates over public ISDN telephone lines. Features include:

•Compatibility with EuroISDN (ETSI/DSS1/NET3), French VN4, and Japanese INS64 switch protocols

•USB interface for easy installation; hot-swappable (Windows 2000 and Windows 98) with other USB devices without restarting or reconfiguring your PC

•Compatibility with U.S. NI-1, AT&T 5ESS, and DMS-100 switch protocols

•Compatibility with V.110*, V.120, ML-PPP, and X.75 protocols

•ISDN BRI (2B+D) and analog ports

•USB port (Type B)

•Support of PPP (Point-to-Point Protocol) for high speed ISDN connections

•Tone detection to allow use of a standard telephone for ISDN line access (an ISDN telephone is not required)

•Automatic detection of incoming calls as voice or data

•Windows 2000 and Windows 98/95 software utility for easy ISDN line configuration

•AT commands, S-registers, and result codes

•Ability to use the same communications software as analog modems

•Flash memory for easy firmware upgrades

*The MTA128ST-USB is manufactured in two builds. To determine the build of your terminal adapter (TA), issue the ATI2 command in a terminal window. If the TA responds to the command with MTA128ST- USB, then it supports V.110. If your TA resonds to the ATI2 command with MTA128ST-USB-RC, V.110 support is not available.

8