Single Screen with PAN/TILT/ZOOM Controller
(1)After enabling PAN/TILT/ZOOM in Administration mode, if you select an image from "Camera 1~4" button, you will see the next screen.
(2)Before operating PAN/TILT/ZOOM, the PAN/TILT/ZOOM controllers must have been connected, and P/T/Z configuration must have been established in Administration mode.
(3)You will see scrolling bars around the image. You may select your preferred angle and position of the image by clicking each bar. To move the camera to the presaved position, select the position in the box on the left bottom of screen.
(4)To stop moving the image after clicking the control bar, click "▲" in the center of the bar to seize the image.
Differences do exist depending on the types of PAN/TILT/ZOOM controller. Sluggishness may occur in the image due to the time duration in network.
(5)If you click "Quad" button on left side of the screen in Application mode, you may simultaneously view all 4 images.
(6)To transfer from Application mode to Administration mode, click "Administration" on the left upper corner of the screen.
41