Samsung Version 1.1 owner manual Select items? IP notify-mail enable? Y

Page 79

Enter "5" and go to IP notify-mail address to type E-mail address you want.

Select items? [ ] 5

IP notify-mail address? [webtx@email.com] user@samsung.co.kr

Enter "4" and go to IP notify-mail enable/disable and enable it.

Select items? [ ] 4

IP notify-mail enable? [Y]

Select Quit menu to exit Boot Command Mode.

When all the network settings are properly installed and DHCP function is enabled, Dynamic IP information is sent to the email, which was set while SNS-110 was booting. The following is what happens when the email is sent

To: user@samsung.co.kr

From: WebTransmitter

Subject: IP Notification (168.219.44.137)

New IP 168.219.44.137 is obtained by DHCP. 00-00-f0-ff-a1-ff

79

Image 79

Contents WEB Before You Begin Regulation Approval Table of Contents Administration Mode SNS-110 Overview Functions and FeaturesOverview Page Front View of SNS-110 Names and FunctionRear of SNS-110 Setting Configuration Installing SNS-110Page 15Cm Surface, due to potential damage on the surface Unpacking VTR, DVDP, TV OUT Connecting to InstrumentsVideo Connecting to External InstrumentsEthernet10BaseT/100BaseT Connecting to NetworkG 3 4 G RA RC + + Connecting to Alarm Sensors and External DevicesThat the above PAN/TILT/ZOOM/FOCUS camera and controllers Connecting to PAN/TILT/ZOOM/FOCUS ControllerRS 232C Terminal D-Sub 9Pin RS 232C Connecting to Cable Connecting to RS-232CTerminal Emulation Communication Set-up Creating RS-232C CableConnected from SNS-110 to PCTwisted Cable Creating Ethernet CableBefore You Begin Setting an IP AddressFor Windows 95/98/ME/NT/2000/XP Setting In Ethernet 10BaseT/100BaseTSetting up IP address in Ethernet Setting in Unix Setting up an IP address in Ethernet Setting with IP Installer Window Page Page Changing IP Address Setting Other Network InformationCable Network through Cable Modem SNS-110Log-in Ideal SpecificationLog-in through Netscape First Time Log-in through ExplorerPage After the First Time Others Initial Screen Application Mode Video Image Monitoring ModeSingle Screen Automatic Sequential Screen Quadruplex ScreenSingle Screen with PAN/TILT/ZOOM Controller Administration Mode Camera Set-up PAN/TILT/ZOOM Supported, contact your vendor PAN/TILT/ZOOM Set-upRecommend Quad/Sequential Set-upWeb Transmitter Set-up Password Right after the S/W upgrade, ‘Software Reset’ doesn’t work Recommend Setting the Alarm / Relay OutEnable Network Set-up Between 0~ Page File Transfer Setting Page Custom User Interface Setup ABOUT/ SUPPORT/ Help Page WEB Appendix a SNS-110 Specifications Performance Outside view WEB B How to Enter the Factory Default Appendix B Factory DefaultValues for setting up SNS-110 Dhcp WEB C Starting Console Appendix C How to Use ConsoleMessage Internet Video Server webTX SNS-110 Command Page 5reset SNS-110 »Reset ‰ˆ¯·ˇ· Manual Configuration Mode Page Page Automatically changed to 0. Confirm for more accurate setup WEB D Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mailSelect items? IP notify-mail enable? Y Registering IP information with Administration server Page Page CGI Program for the Administration Server Setting with the Web BrowserWEB E When e-mails are not sent and alarm sets off Appendix E FAQPage When normally-functioning SNS-110 is suddenly not connecting You cannot use FTP for transfer when setting up FTP transfer E C T R O N I C S