Samsung Version 1.1 owner manual Rear of SNS-110

Page 9

Rear of SNS-110

ALARM IN R/O RX TX

RS-232C

ETHERNET

DC 5V

1 2 G 3 4 G RA RC - + - +

1 2 3456

	Name		Function

① Alarm Input(1,2,3,4)		Sensor Input : 1,2,3,4	Connects to maximum of 4 alarm sensors.
		Signal GND : G	Connects to maximum of 4 alarm sensors.
		Signal GND : G

② R/O (Relay Out)		RA	Connected to the external device for remote control
		RC

			Connects to RS-485 cable and remotely regulate
③ RS-485(+,-)		RX(+,-)	PAN / TILT / ZOOM / FOCUS
③ RS-485(+,-)		RX(+,-)	controllers.
		TX(+,-)	Full Duplex : use RX and TX.
			Half Duplex : use TX .

			Connects to console and an external modem through
			the RS-232C cable connection.
④ RS-232C		9Pin DSub Connector	❈ You are recommended to use the RS-232C
④ RS-232C		9Pin DSub Connector	cable packed with this
			cable packed with this
			SNS-110.
			❈The current version does not support
			connecting an External Modem.

⑤ Network Port		RJ-45 Connector	Connects to Ethernet (10BaseT/110BaseT) and cable
⑤ Network Port		RJ-45 Connector	modem network.
			modem network.

			Supplies the power to SNS-110 with a DC 5V input
⑥ Power In			terminal
⑥ Power In			❈Only use the compatible adapter enclosed in
			❈Only use the compatible adapter enclosed in
			the SNS-110 package and supply DC 5V.

Image 9

Contents WEB Before You Begin Regulation Approval Table of Contents Administration Mode Functions and Features SNS-110 OverviewOverview Page Front View of SNS-110 Names and FunctionRear of SNS-110 Setting Configuration Installing SNS-110Page 15Cm Surface, due to potential damage on the surface Unpacking VTR, DVDP, TV OUT Connecting to InstrumentsVideo Connecting to External InstrumentsEthernet10BaseT/100BaseT Connecting to NetworkG 3 4 G RA RC + + Connecting to Alarm Sensors and External DevicesThat the above PAN/TILT/ZOOM/FOCUS camera and controllers Connecting to PAN/TILT/ZOOM/FOCUS ControllerRS 232C Terminal D-Sub 9Pin RS 232C Connecting to Cable Connecting to RS-232CTerminal Emulation Communication Set-up Creating RS-232C CableConnected from SNS-110 to PCTwisted Cable Creating Ethernet CableBefore You Begin Setting an IP AddressFor Windows 95/98/ME/NT/2000/XP Setting In Ethernet 10BaseT/100BaseTSetting up IP address in Ethernet Setting in Unix Setting up an IP address in Ethernet Setting with IP Installer Window Page Page Changing IP Address Setting Other Network InformationCable Network through Cable Modem Ideal Specification SNS-110Log-inLog-in through Netscape First Time Log-in through ExplorerPage After the First Time Others Application Mode Video Image Monitoring Mode Initial ScreenSingle Screen Automatic Sequential Screen Quadruplex ScreenSingle Screen with PAN/TILT/ZOOM Controller Administration Mode Camera Set-up PAN/TILT/ZOOM Supported, contact your vendor PAN/TILT/ZOOM Set-upRecommend Quad/Sequential Set-upWeb Transmitter Set-up Password Right after the S/W upgrade, ‘Software Reset’ doesn’t work Recommend Setting the Alarm / Relay OutEnable Network Set-up Between 0~ Page File Transfer Setting Page Custom User Interface Setup ABOUT/ SUPPORT/ Help Page WEB Appendix a SNS-110 Specifications Performance Outside view WEB B Appendix B Factory Default How to Enter the Factory DefaultValues for setting up SNS-110 Dhcp WEB C Appendix C How to Use Console Starting ConsoleMessage Internet Video Server webTX SNS-110 Command Page 5reset SNS-110 »Reset ‰ˆ¯·ˇ· Manual Configuration Mode Page Page Automatically changed to 0. Confirm for more accurate setup WEB D Appendix D Dynamic IP Information Transfer To send IP information to the administrator E-mailSelect items? IP notify-mail enable? Y Registering IP information with Administration server Page Page CGI Program for the Administration Server Setting with the Web BrowserWEB E When e-mails are not sent and alarm sets off Appendix E FAQPage When normally-functioning SNS-110 is suddenly not connecting You cannot use FTP for transfer when setting up FTP transfer E C T R O N I C S

Rear of SNS-110

Name

PAN / TILT / ZOOM / FOCUS