INSTALLATION AND BASIC ADJUSTMENTS
Turning ON/OFF
Turning On Projector
1.Plug the power cord into the power terminal on the rear side of the projector.
2.Press and push the power switch on the rear side of the projector toward
3.Press the POWER button of the projector or the ON button of the remote control.
4.A picture will be displayed on the screen in approximately 30 seconds.
1 | 2 | 3 |
| ■ | When you turn off the projector, the cooling fan | ||
|
| stops within 1 minute and 30 seconds. | ||
NOTE | ||||
When the cooling fan stops, push the power | ||||
| ■ | |||
|
| switch toward "O" and unplug the power cord. | ||
|
|
|
| |
Turning the power OFF
1.Press the [POWER] button on the projector or the [OFF] button on the remote control.
2.Select the [OK] button displayed on the screen.
3.Do not unplug the power cord from the wall outlet , and do not press the <O> side of the power switch at the back of the projector during the cooling time (approximately one and a half minutes). Insufficient cooling may reduce the life time of the product. During the cooling time, the [LAMP] operating LED on the main body blinks.
4.When the cooling operation is successfully completed, the [LAMP] operating LED on the main body is turned off and the [STAND BY] operating LED is turned on. Press the <O> side of the power switch at the back of the projector to minimize standby power consumption.
1 | 2 | 3 |
Turn Power Off?
OK | Cancel |
Preparation
Installation and Basic Adjustments
15