Samsung SP-H800 manual Projector Lamp

Page 5

Caution on Lamp Use and Replacement

Projector Lamp

■The projector lamp is an expendable whose life time and performance is determined by the operating conditions such as the usage time and environment. The lamp needs to be replaced periodically before the life time ends so as to prevent a sudden degradation of performance or malfunction.

■Free servicing will be offered within 90 days after purchasing of the product and within 300 hours of product use, if the problem is due to a defective lamp.

■You can check the lamp use time by pressing the INFO button on the remote control.

Caution on Lamp Replacement

■Unplug the power cord before replacing the lamp.

■Inside of the projector is very hot. Cool off the projector for at least an hour after turning off.

■Contact your dealer to purchase a lamp for replacement. (Ultra violets from the lamp can damage your eyes.)

■Turn off the power of the lamp before replacement or repair. (Due to the high-pressure of the lamp, it is possible to explode.)

■Take care when handling the lamp because any broken pieces of glass may harm you if the lamp breaks. For more detailed information about the procedures to use, refer to <Replacing the Lamp> on page 83.

Caution on Lamp Use

■This projector produces intense light. Do not stare light source directly.

Take Care: The ultraviolet ray from the lamp may harm your eyesight.

■Do not touch the exhaust vent during operation. It can be very hot.

■Do not expose the unit to rain or moisture.

Preparation

Caution on Lamp Use and Replacement

5

Image 5

Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanBlack Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting Mode Light SettingSetup Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications