Samsung SP-H800 manual Connecting to VCR/Camcorder/Cable Box

Page 23

CONNECTING TO VIDEO EQUIPMENT

Connecting to VCR/Camcorder/Cable Box

Rear side of Projector

S-Video Cable

Video Cable

or

VCR

Rear Connection

Camcorder

Cable Box

Connections and Source Setup Connecting

Connect COMPOSITE (yellow) input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable.

1If the video equipment has S-VIDEO OUT port, connect it to S-VIDEOinput port of the projector.

Using the S-VIDEO connection, provides a higher visual quality.

When finishing connecting the

2devices, connect the power of the projector and the VCR.

to Video Equipment

Viewing the picture

COMPOSITE

1

S-VIDEO

2

1 Turn on the projector and press the

Composite

COMPOSITE button to select Composite.

 

2Connect the projector and the video equipment via S-Video cable and press the S-VIDEObutton to select S-Video.

When Composite Mode is not available, check the video cables are in place.

Check that the projector and the video equipment are turned off before connecting

NOTE cables.

This projector does not support sound. (Separate audio system is needed for sound.)

This product does not support the PAL-N

broadcasting type.

23

 

Image 23
Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanBlack Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting Mode Light SettingSetup Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications