Samsung SP-H800 manual Connecting to the Digital TV Receiver

Page 25

CONNECTING TO VIDEO EQUIPMENT

Connecting to the Digital TV Receiver

Rear side of Projector

PC Video Cable

DVI Cable	Component Cable
	or
Digital TV Receiver
(Set-Top Box)
	Antenna Input
	Rear Connection

When finish connecting the devices,

1 Connect antenna cable to antenna 3 connect the power of the projector signal input terminal of the receiver.

and the DTV receiver.

Connect the COMPONENT 1 (Y/Pb/Pr) or COMPONENT 2

(Y/Pb/Pr) input port at the back of the projector to the Component port at

2receiver with the component cable.the back of the digital broadcast

If the digital broadcast receiver provides a DVI or PC output port, you can connect a digital broadcast receiver using the [DVI] or [PC] input port of the projector.

Viewing the picture

COMP.1	1 Turn on the projector and press the COMP.1	Component1
1	button to select Component1.
COMP.2
2	2 Press the COMP.2 button to select
PC	2 Press the COMP.2 button to select
PC	Component2 if COMPONENT2 is connected.
DVI	If the receiver is connected to DVI or PC port,
	If the receiver is connected to DVI or PC port,
	press the DVI or PC button to select DVI or PC	DVI
	respectively.

■When Component Mode is not available, check that the component cables are in place.

Connections and Source Setup Connecting to Video Equipment

25

Image 25

Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Selecting Picture Mode Selecting Picture ModeSettings for Each Picture Mode Custom Settings of the Picture Custom Settings of the PictureCustom Picture Menu Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeDNIe Mode Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanSetting the Black Level Setting the Black LevelBlack Level Modes Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuSetup Light SettingLight Setting Mode Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications