Samsung SP-H800 manual Screen and External Source

Page 73

Screen and External Source

Symptoms

Cannot see picture images.

Poor color.

Images are not clear.

Strange noise.

The operating LED is lit up.

Lines appear on screen.

Green appears on the screen.

Cannot see the picture from the external devices.

Only blue screen appears.

Screen appears in black and white or odd color/screen is too dark or bright.

Troubleshooting

 

Note

Be sure that the power cord of the projector is in place.

 

Page 15

Be sure that the proper input source is selected.

 

Page 26

Check that the connectors are properly connected to the

 

Pages

ports at the back of the projector.

23~25

Check the Remote Control batteries.

 

Page 12

Be sure that the Color, Brightness settings are not at their

 

Page 31

lower limit.

 

 

Adjust the Color and Brightness.

 

Page 31

Adjust the focus.

 

Page 16

Check that the projection distance is either too far or too

 

Page 19

near to the screen.

 

 

If a strange sound continues, contact our service center.

 

 

Take action referring to the contents of the

 

Page 9

Countermeasures against Abnormal Operating LEDs.

 

 

 

Noisy lines may appear for PC mode in case of frequency

 

 

discrepancy. Adjust the vertical frequency of your video

 

Page 67

card on the advanced display property.

 

 

Be sure to properly connect the external devices.

 

Pages

Especially, connect the component (Y, Pb, Pr) cables

 

23~25

matching the color codes.

 

 

Be sure that the proper operation of the external device.

 

Pages

Adjustable items of the Custom Picture Menu are properly

 

26, 31

set.

 

 

Be sure to properly connect the external devices.

 

Pages

26,

Check the connection cables again.

23~25

 

Adjustable items of the Custom Picture Menu are

 

Page 31

properly set.

 

 

Execute Factory Default if you want to restore the factory

 

Page 52

default setting values.

 

 

Troubleshooting

Before Contacting Service Personnel

73

Image 73
Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Selecting Picture Mode Selecting Picture ModeSettings for Each Picture Mode Custom Settings of the Picture Custom Settings of the PictureCustom Picture Menu Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeDNIe Mode Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanSetting the Black Level Setting the Black LevelBlack Level Modes Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuSetup Light SettingLight Setting Mode Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications