Samsung SP-H800 manual Setting up the PC Environment, Table supported by this projector

Page 63

Setting up the PC Environment

1 Click the right mouse button on the Windows wallpaper 1 and click on Properties.

Display Properties tab will appear.

2Click on Settings tab and set the Screen resolution by referring to Resolution described in the display mode

table supported by this projector.

■ You do not have to change Color quality setup.

3 Press the Advanced button. Another property window will appear.

4 Click on Monitor tab and set the Screen refresh rate by

2

	referring to Vertical Frequency described in the display	3
	mode table supported by this projector.	3
	mode table supported by this projector.

■Set up both the vertical and horizontal frequency instead of Screen refresh rate.

5 Click the OK button to close the window, and click the

4

OK button of the Display Properties window to close the window.

■The computer might begin restart automatically.

6Shut down the PC and connect to the projector. (Page 64)

	■	Process might vary depending on the type of computers or Windows versions.
		This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor.
NOTE ■

■Projected images may differ from the monitor depending on monitor manufacture or Windows versions.

■If a band or an unusual signal appears on the projector when PC is turned off or disconnected, switch to Composite mode using the SOURCE button or check that PC is properly connected.

■When connecting the projector to PC (including DVI connection), check that PC setup complies to display settings supported by this projector. If not, there may be signal problems.

Connecting to PC

Setting up the PC Environment

63

Image 63

Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Selecting Picture Mode Selecting Picture ModeSettings for Each Picture Mode Custom Settings of the Picture Custom Settings of the PictureCustom Picture Menu Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Mode Gamma CorrectionGamma Correction Settings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeDNIe Mode Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Mode Color ControlColor Control Film Mode Film ModeOverscan OverscanSetting the Black Level Setting the Black LevelBlack Level Modes Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting SetupLight Setting Mode Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications