Samsung SP-H800 manual Test Patterns, Test Pattern Menu

Page 51

Test Patterns

Generated by the projector itself. Utilized as installation basis for better installation of the projector.

MENU

1

2,3,4

/

2,3,4

EXIT

5

Setup

1

Press the MENU button.

The main menu is displayed.

Press the or button to move to Setup, then

2press the button.

The Setup menu is displayed.

Press the or button to move to Test Pattern,

3then press the button.

The Test Pattern options will be displayed.

Press the or button to move to desired

4pattern, then press the button.

The selected pattern is displayed.

5Press the EXIT button to exit the settings.

Test Pattern Menu

Crosshatch

You can check whether the picture is distorted or not.

Screen Size

You can refer to picture format sizes such as 1.33:1

 

 

or 1.78:1.

Color Standard

You can view the difference by changing the Color

 

 

Standard to SMPTE_D/HD/EBU. For more information

 

about the Color Standard, refer to page 32.

Red

Red Screen, only for color adjustment.

 

Green

Green Screen, only for color adjustment.

 

Blue

Blue Screen, only for color adjustment.

 

White

White Screen, only for color adjustment.

 

6500K_White

White Screen, shows brightest white color possible.

 

 

Setup

 

Install

: Front-Floor

Light Setting

: Theater

V-Keystone

 

Test Pattern

 

PC

 

Factory Default

 

More

 

 

Move Enter Return

Test Pattern

 

Crosshatch

 

 

Screen Size

 

 

Color Standard

 

Red

 

 

Green

 

 

Blue

 

 

More

 

 

Move

Enter

Return

Test Pattern

More

White

6500K_White

Move Enter Return

The Crosshatch and Screen Size patterns

NOTE

of this projector are

 

provided by JKP (JK

 

Production).

The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may not comply with the actual colors displayed during video playback.

Test Patterns

51

Image 51
Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Selecting Picture Mode Selecting Picture ModeSettings for Each Picture Mode Custom Settings of the Picture Custom Settings of the PictureCustom Picture Menu Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Mode Gamma CorrectionGamma Correction Settings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeDNIe Mode Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Mode Color ControlColor Control Film Mode Film ModeOverscan OverscanSetting the Black Level Setting the Black LevelBlack Level Modes Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting SetupLight Setting Mode Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications