Before Contacting Service Personnel
If this projector does not operate properly, check the following first.
If the problem is continues, contact your dealer.
Installation and Connection
Symptoms
No Power.
Image is distorted or trapezoidal.
Troubleshooting
Be sure that the power cord in place and the power switch on the rear side of the projector is turned on
Relocate the position so that the screen is at a right angle with the beam from the projector and adjust the Zoom Control and the Focus Ring. Avoid using the
Note
Page 15
Pages 16~19
Want to install projector on ceiling.
Image is distorted or trapezoidal.
Ceiling bracket is an optional accessory.
Please contact your dealer.
Be sure that the connection cable (video) is properly
Pages
connected to the proper port. Unless they are connected
properly, the device is not available.
23~25
Menu and Remote Control
Troubleshooting
Before Contacting Service Personnel
Symptoms
Remote control does not work.
I cannot select a menu.
Troubleshooting |
| Note |
■ Be sure that the proper external source is selected. |
| Page 26 |
■ Check batteries of the remote control. If there is a |
| Page 12 |
problem, replace them with recommended ones. |
|
|
■ Check the angle and distance between the remote control |
| Page 13 |
and the projector. Be sure that there is no obstacle |
|
|
between the projector and the remote control that may |
|
|
block the signal. |
|
|
■Direct lighting of
■Check if the remote control battery is empty.
Check if the menu is displayed in gray. A | Pages |
menu is unavailable. | 23~26 |
72