Samsung SP-H800 manual Saving Custom Picture Settings

Page 35

Saving Custom Picture Settings

Used to save custom picture (Contrast, Brightness, Sharpness, Color, Tint, Color Temperature and Gamma) settings.

MENU

1

2,3,4,5,6

//œ/

2,3,4,5,6

EXIT

7

Picture Adjustment

1

2

3

Press the MENU button.

The main menu is displayed.

Press the or button to move to Picture, then press the button.

The Picture menu is displayed.

Press the or button to move to Custom Picture, then press the button.

The Custom Picture menu is displayed.

 

Picture

 

Picture Mode

: Movie 1

Custom Picture

 

Picture Size

: Full

Position

 

DNIe

: Off

Noise Reduction

: Off

More

 

 

Move Enter Return

Saving Custom Picture

4

5

Press the or button to move to Save, then press the button.

The Save menu is displayed.

Press the or button to move to desired mode, then press the button.

 

 

Custom Picture

 

More

 

 

 

Color Standard : SMPTE_C

 

Color Temperature

 

Gamma

: Film

 

Save

 

Move

Enter

Return

 

 

Save

 

 

 

 

 

 

User1

 

 

User2

 

 

User3

 

Settings

6

Press the œ or button to move to OK, then

Move

Enter

press the

button.

 

Save

Setup is switched to the selected mode.

Save Current Setting to User1?

 

OK

Cancel

7

Move

Enter

Return

Press the EXIT button to exit the settings.

 

 

The User1, User2 and User3 modes are saved NOTE differently according to external input sources

(Component1/ Component2/ S-Video/Composite/PC/DVI).

35

Image 35
Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanBlack Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting Mode Light SettingSetup Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications