Samsung SP-H800 manual Color Control Mode

Page 41

Color Control

You can filter the color of the entire screen according to your taste.

MENU

1

2,3,4

…/†

2,3,4

EXIT

5

Picture Adjustment

1

2

3

4

5

Press the MENU button.

The main menu is displayed.

Press the ▲ or ▼ button to move to Picture, then press the button.

The Picture menu is displayed.

Press the ▲ or ▼ button to move to Color Control, then press the button.

The Color Control options will be displayed.

Press the œ or √ button to move to desired mode, then press the button.

The picture will only be displayed using the selected color.

Press the EXIT button to exit the settings.

Picture

		… More
		Black Level		: 7.5 IRE		√
		Color Control : Off				√
		Film Mode		: On		√
		Overscan		: On		√
	Move			Enter	Return
		Color Control

œ		Off		Monochrome		√

Move Enter Return

Color Control

Color Control Mode

Off	Shows the picture in the original color.
Monochrome	Shows the picture in black and white color by
	filtering out all color signals.
Red	Shows the picture in red by filtering out the
	green and blue color signals.

Green	Shows the picture in green by filtering out the
	red and blue color signals.
Blue	Shows the picture in blue by filtering out the		41
	red and green color signals.		41

Image 41

Contents Owners Instructions Table of Contents Troubleshooting Optical engine adopting advanced DLP technology Features and DesignProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side Rear Side and CablesKeystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlUsing Remote Control in Dark Place Light To Install the Projector InstallationTurning On Projector Turning ON/OFFUsing the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Before Connections Check the following Before ConnectingConnecting to VCR/Camcorder/Cable Box Connecting to Video Equipment Connecting to DVDConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color StandardColor Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma ModeGamma Correction Settings Saving Custom Picture SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanBlack Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Flipping/Reversing the Projected Image Install MenuLight Setting Mode Light SettingSetup Correcting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsRestoring the Factory Default Settings Press the Info button InformationLED Operating Modes Setting the LEDMenu Option Menu Option Setting the LanguageSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PCTable supported by this projector Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCVesa Plug & Play Pin Configuration of PC Video Port PlugAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Cleaning the Projector and Lens Storage and MaintenanceOptional Parts Purchasing Optional PartsGlossary Gamma Mode Antenna in PortDLP HD2+, DC3 Structure of Screen Menu Select Composite/S-Video/Component Input ModeLED Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementRS-232C Connection and Control Commands Classification Model SP-H800 SpecificationsFunction and Transmission Codes Remote Control Specifications