Samsung SP-H800 manual Setting up the External Input Source

Page 26

Setting up the External Input Source

You can select a device connected to the projector to display.

Connections and Source Setup

One Touch

MENU

1

2,3,4

…/†

4

EXIT

5

Press the desired source button (COMP.1/ COMP.2/ S-VIDEO/COMPOSITE/ PC/DVI).

Pressing a button switches to the respective mode. You can not switch to the mode if the projector is not connected to the respective device.

Component1

Setting up the External Input Source

1	Press the MENU button.
	The main menu is displayed.

2Press the button to select Input.The Input menu is displayed.

3Press the button to select Source List.The Source List menu is displayed.

4	Press the ▲ or ▼ button to move to desired input
	mode, then press the	button.
	The source input you chose is displayed.

If the input mode is not selected, check that cables are in place.

				Input

	Source List		: Component1 √
	Edit Name			√
Move		Enter		Return
			Source List

	Component1			: - - - -
	Component2			: - - - -
	S-Video			: - - - -
	Composite			: - - - -
	PC			: - - - -
	DVI			: - - - -

Move Enter Return

5Press the EXIT button to exit the settings.

26

Image 26

Contents Owners Instructions Table of Contents Troubleshooting Features and Design Optical engine adopting advanced DLP technologyProjector Lamp Page Preparation Front/Upper Side and Accessories Indicator Information Rear Side and Cables Rear SideRemote Control Buttons KeystoneOperating the Remote Control Operating Move/Select ButtonUsing Remote Control in Dark Place Light Installation To Install the ProjectorTurning ON/OFF Turning On ProjectorZoom and Focus Adjustment Using the Zoom Knob and the Focus RingLeveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Page Connections and Source Setup Check the following Before Connecting Before ConnectionsConnecting to VCR/Camcorder/Cable Box Connecting to DVD Connecting to Video EquipmentConnecting to the Digital TV Receiver Setting up the External Input Source Naming the External Connections Picture Adjustment Picture Adjustment Settings for Each Picture Mode Selecting Picture ModeSelecting Picture Mode Custom Picture Menu Custom Settings of the PictureCustom Settings of the Picture Changing the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Color TemperatureGamma Correction Gamma ModeGamma Correction Saving Custom Picture Settings SettingsDNIe Mode Setting up DNIeSetting up DNIe Selecting Picture Size Selecting Picture SizePicture Adjustment Selecting Picture Size Supported Picture SizesScreen Position Adjustment Screen Position AdjustmentSelecting Noise Reduction Selecting Noise ReductionColor Control Color Control ModeColor Control Film Mode Film ModeOverscan OverscanBlack Level Modes Setting the Black LevelSetting the Black Level Still Picture Page Setup Install Menu Flipping/Reversing the Projected ImageLight Setting Mode Light SettingSetup Correcting Vertical Keystone Correcting V-KeystoneTest Patterns Test Pattern MenuRestoring the Factory Default Settings Information Press the Info buttonSetting the LED LED Operating ModesMenu Option Setting the Language Menu OptionSetting the Menu Position Setting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Selecting the Quick Menu Connecting to PC Before Connecting to PC Display modes supported by this projectorSetting up the PC Environment Table supported by this projectorConnecting to PC Using PC Video Cable or DVI CablePin Configuration of PC Video Port Plug Vesa Plug & PlayAutomatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Reset the PC Reset the PCTroubleshooting Before Contacting Service Personnel Before Contacting Service PersonnelScreen and External Source Page Other Information Storage and Maintenance Cleaning the Projector and LensPurchasing Optional Parts Optional PartsGamma Mode Antenna in Port GlossaryDLP HD2+, DC3 Select Composite/S-Video/Component Input Mode Structure of Screen MenuLED Structure of Screen Menu Lamp Replacement Lamp Replacement ProcedureRS-232C Connection and Control Commands Specifications Classification Model SP-H800Remote Control Specifications Function and Transmission Codes