Samsung ML-3050 manual Finding more information, Selecting a location, Clearance space

Finding more information

You can find information for setting up and using your from the following resources, either printed or onscreen.

Quick Install	Provides information on setting up your printer
Guide	and, therefore, be sure to follow the
	instructions in the guide to get the printer
	ready.

Online User’s	Provides you with step-by-step instructions for
Guide	using your printer’s full features, and contains
	information for maintaining your printer,
	troubleshooting, and installing accessories.
	This user’s guide also contains the Software
	Section providing you with information on how
	to print documents with your printer on various
	operating systems, and how to use the
	supplied software utilities.
	Note
	You can access the user’s guides in
	other languages from the Manual
	folder on the printer driver CD.
Network Printer	Contained on the network utilities CD,
User’s Guide	provides you with information on setting up
	and connecting your printer to a network.
Printer Driver	Provides you with help information on printer
Help	driver properties and instructions for setting up
	the properties for printing. To access a printer
	driver help screen, click Help from the printer
	properties dialog box.
Samsung website	If you have Internet access, you can get help,
	support, printer drivers, manuals, and order
	information from the Samsung website,
	www.samsungprinter.com.

Selecting a location

Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays.

The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table.

Clearance space

Front: 500 mm (enough space so that trays can be opened or removed)

Back: 350 mm (enough space to allow opening of the rear cover or the duplex unit)

Right: 100 mm (enough space for ventilation)

Left: 100 mm (enough space to allow opening of the control board cover)

1.4 <Introduction>