Samsung ML-3050 manual Information menu, Layout menu

Information menu

This menu contains printer information pages that give details about the printer and its configuration.

Item	Explanation
Menu Map	The menu map shows the layout and current
	settings of the control panel menu items.
Configuraton	The configuration page shows the printer’s
	current configuration. See page 8.1.
Demo Page	The demo page allows you to check if your
	printer properly performs printing. See
	page 2.6.
PCL Font List	The font sample list shows all of the fonts
PS3 Font List	currently available in the selected language.
EPSON Font

Layout menu

Use the Layout menu to define all settings relating to output.

Item Explanation

Orientation

Values: Portrait, Landscape

Choose the default orientation of the print image on the page.

Portrait Landscape

Simplex	Values: 0.0
Margin

Set the margin of print materials for one-sided printing. You can increase or decrease the value in 0.1 mm increments.

•Top Margin: Set the top margin, from 0.0 to 250 mm.

•Left Margin: Set the left margin, from 0.0 to 164 mm.

Item Explanation

Duplex

Values: Off, Long Edge, Short Edge

To print on both sides of paper, choose the binding edge as follows.

•Long Edge: Flip on the long edge. Prints pages to read like a book.

•Short Edge: Flip on the short edge. Prints pages to read by flipping over like a note pad.

			2
2	3	5	3
			5

Long Edge in the	Long Edge in the
Portrait orientation	Landscape orientation
2

	3
2	5
3
5

Short Edge in the	Short Edge in the
Portrait orientation	Landscape orientation

Select Off to print on one side of the paper.

Note

This menu item is available only with the

ML-3051ND.

Duplex	Values: Top/Left, Short/Long
Margin

In this menu, you can set the margins for double- sided printing. You can increase or decrease the value in 0.1 mm increments.

•Top Margin: Set the top margin, from 0.0 to 9.9 mm.

•Left Margin: Set the left margin, from 0.0 to 9.9 mm.

•Short Binding: Set the bottom margin of the back of the page for short binding, from 0.0 to 22 mm.

•Long Binding: Set the right margin of the back of the page for long binding, from 0.0 to 22 mm.

Note

This menu item is available only with the

ML-3051ND.

2.2 <System setup>