Samsung ML-3050 manual Setting Ethernet speed, Restoring the network configuration

Page 26

Setting Ethernet speed

You can select the communication speed for Ethernet connections.

1Press Menu until Network appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Ethernet Speed appears and press OK.

3Press the Scroll buttons until the speed you want appears and press OK.

4Press Stop to return to Standby mode.

Restoring the network configuration

You can return the network configuration to its default settings.

1Press Menu until Network appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Clear Setting appears and press OK.

3Press OK when Yes appears to restore the network configuration.

4Power the printer off and back on.

Printing a network configuration page

The network configuration page shows how the network interface card on your printer is configured.

1Press Menu until Network appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Network Info appears and press OK.

3Press OK when Yes appears.

The network configuration page prints out.

4.3 <Network setup>

Image 26

Contents Page Page Contact Samsung World Wide Country Customer Care Center Web SiteContents Installing accessories MaintenanceTroubleshooting SpecificationsImportant Precautions and Safety Information Canadian Radio Interference Regulations FCC Statement for Wireless LAN useFCC Regulations Federal Communications Commission FCCEuropean States with restrictions on use European States qualified under wireless approvalsWireless Guidance Replacing the Fitted Plug for UK Only Introduction Special featuresSpecial features Printer overview Finding more information You can print in Windows 95/98/Me/NT 4.0/2000/XP/2003Front view Features ML-3050 ML-3051N ML-3051NDPrinter overview Rear view Control panel overview ML-3051N and ML-3051NDClearance space Finding more informationSelecting a location Accessing control panel menus System setupUsing control panel menus ML-3051N,ML-3051NDonly Menu overviewInformation menu Layout menuPaper menu Graphic menuSystem Setup menu Emulation menuPostScript Network menu Printing a demoChanging the display language ML-3051N,ML ML-3050, ML-3051NFrom the software application Using toner save modeUsing the control panel button Software overview Supplied softwareSystem requirements Printer driver featuresFeature WindowsRequirements LinuxMacintosh Via network administration programs Network setupConfiguring TCP/IP Supported operating systemsDynamic addressing BOOTP/DHCP Configuring EtherTalkConfiguring IPX frame types Static addressingPrinting a network configuration Setting Ethernet speedRestoring the network configuration Loading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperMedia type Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose trayPrinting to the rear cover Face up Selecting an output locationPrinting to the output tray Face down Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentToner cartridges Ordering supplies and accessoriesHow to purchase Accessories Cleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintaining the toner cartridge Checking the remaining tonerToner Low appears on the display. ML-3051N,ML-3051ND only Redistributing toner cartridgeReplacing the toner cartridge Open the front cover Pull the toner cartridge outItems Yield Average Maintenance partsClearing the Toner Low Replace Toner message Paper feed area TroubleshootingClearing paper jams TrayOptional tray Multi-purpose trayAround the toner cartridge Paper exit areaDuplex unit area ML-3051NDonly Duplex jamTips for avoiding paper jams Understanding the Status LED Troubleshooting checklistCondition Suggested solutions Status DescriptionUnderstanding display messages Toner cartridge-related messages Solving general printing problems Click the Samsung ML-3050 Settings and Printers. RightSpool Settings button Series PCL 6 printer iconSolving print quality problems Misformed Condition Suggested solutions BackScatter CharactersCommon Windows problems Common PostScript problemsCommon Linux problems Common Macintosh problemsInstalling a memory Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordSelect the Samsung ML-3050 Series PS printer Installing a wireless network interface cardSetting the memory in the PostScript printer properties Configuring the wireless network parameters Configuring basic network settingsHexadecimal Alphanumeric Selecting the authentication typeSetting Encryption Printer specifications SpecificationsPrinter specifications Specifications and DescriptionIndex System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Changing the Software LanguageRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPaper Orientation Printer SettingsLayout Tab Scaling Printing Paper TabSource Toner Save Mode Image ModeResolution Graphics TabPrinter Tab Extras TabAbout Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Select Local Port and click New PortUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Opening the Unified Driver Configurator Using the Unified Driver ConfiguratorUninstalling the Unified Linux Driver Click UninstallPrinters Tab Printers ConfigurationPorts Configuration Classes TabConfiguring Printer Properties Printing from ApplicationsPrinting Files Uninstalling the Printer driver Installing printer driver for MacintoshInstall the Printer driver ML-3050 onlyFor a USB-connected Macintosh Setting Up the PrinterFor a Network-connected Macintosh Select Socket/HP Jet Direct in Printer TypePrinting Changing Printer SettingsLayout Setting Printing a DocumentPrinting Multiple Pages on One Sheet of Paper Printer Features SettingResolutionQuality Reverse DuplexDuplex Printing Index Macintosh 31 uninstall Rev