Samsung ML-2010 Series manual Using Print Materials

•For Card Stock or Custom-sized materials:

-Postcards, 3.5 by 5.83 in.(index) cards and other custom- sized materials can be printed with this printer. The minimum size is 76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by 356mm(8.5 by 14 in.)

-Always insert the short-edge into the manual tray first. If you want to print in landscape mode, make this selection through your software. Inserting paper long-edge first may cause a paper jam.

- Do not print on media smaller than 76mm (3.0 in.) wide or	3
127mm(5.0 in.) long.
• For preprinted paper:

- Letterheads must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the printer’s fusing temperature of 205 °C (400 °F) for 0.1 second.

- Ink on letterheads must be non-flammable and should not adversely affect any printer rollers.

- Forms and letterheads should be sealed in a moisture-proof wrapping to prevent changes during storage.

- Before you load preprinted paper as forms and letterheads, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper.

• Do not use Carbonless paper and Tracing paper. Use of these types of paper could result in chemical smells and could damage your printer.

USING PRINT MATERIALS 3.5