Samsung ML-2010 Series manual Scatter, Misformed, Characters, Skew, Curl or wave

Page 67

 

 

Problem

Solution

 

 

 

 

 

 

Background

Background scatter results from bits of toner distributed on

 

 

scatter

the printed page.

 

 

 

 

• The paper may be too damp. Try printing with a different

 

 

 

 

batch of paper. Do not open packages of paper until

 

 

 

 

necessary so that the paper does not absorb too much

 

 

 

 

moisture.

 

 

 

 

• If background scatter occurs on an envelope, change the

 

 

 

 

printing layout to avoid printing over areas that have

 

 

 

 

overlapping seams on the reverse side. Printing on seams

 

 

 

 

can cause problems.

 

 

 

 

• If background scatter covers the entire surface area of a

 

 

 

 

printed page, adjust the print resolution through your

 

 

 

 

software application or the printer properties.

 

 

 

 

 

 

 

Misformed

• If characters are improperly formed and producing hollow

 

 

characters

images, the paper stock may be too slick. Try a different

 

 

 

 

paper. See “Paper Specifications” on page 6.3.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page skew

• Check the paper type and quality. See “Paper

 

 

Specifications” on page 6.3.

 

 

 

 

• Ensure that the paper or other material is loaded correctly

 

 

and the guides are not too tight or too loose against the

 

 

paper stack.

 

 

 

 

 

 

Curl or wave

• Check the paper type and quality. Both high temperature

 

and humidity can cause paper curl. See “Paper

 

Specifications” on page 6.3.

 

• Turn over the stack of paper in the input tray. Also try

 

rotating the paper 180° in the input tray.

5.14 SOLVING PROBLEMS

Image 67
Contents ML-2010 Series About the User’s Guide Contact Samsung World Wide Hungary Contents Redistributing Toner Replacing the Toner Cartridge Cleaning the Outside Cleaning the InsideCommon Windows Problems Common Linux ProblemsImportant Precautions and Safety Information 17SAVE These Instructions Environmental and Safety Consideration Ozone Safety Radio Frequency Emissions Declaration of Conformity European Countries Page Introduction You can print in Windows 98/Me/2000/XP Special FeaturesMacintosh Feature Printer Driver FeaturesFront View Printer ComponentsRear View Description On Line/Error and Toner Save LEDsSee Troubleshooting Error Messages on Understanding the Control PanelFunction Description Cancel buttonSetting Up Your Printer Paper Cover a UnpackingComponents may differ from one country to another Carefully remove all of packing tape from the printer Selecting a LocationClearance Space Grasp the front cover and pull it toward you to open Installing the Toner CartridgeSetting UP Your Printer Setting UP Your Printer You can load approximately 150 sheets of paper in the tray Loading PaperLoad paper with the print side facing up Connecting a Printer Cable Turning the Printer on Printing a Demo Demo page shows the printer’s current configurationLinux Driver Installing Printer SoftwareGuide Macintosh DriverRequirements System RequirementsUsing Print Materials Choosing Paper and Other Materials Plain paper Type, Input Sources and CapacitiesGuidelines for Paper and Special Materials Paper Type Input Source/Capacity a Paper Tray Manual trayOnly use labels recommended for laser printers Using Print Materials Verifying the Output Location Using the TraySide up Using the Manual TrayRepeat this step for every page to be printed Printing on Special Materials Using Print Materials Load letterheads in the manual tray with the design face Canceling a Print JobThere are two ways to cancel a print job Press the Cancel button on the control panelTo stop a print job from the Printers folder Cancel buttonMaintaining Your Printer Toner cartridge storage Maintaining the Toner CartridgeRedistributing Toner Maintaining Your Printer Replacing the Toner Cartridge Using the Toner Save ModeCleaning the Outside Cleaning the PrinterCleaning the Inside Remove the manual tray by pulling it out Plug in the power cord, and turn the printer on Pick-up Roller Consumables and Replacement PartsItems Yield Average Transfer RollerSolving Problems Check Solution Troubleshooting ChecklistLine/Error LED is on Problem Possible Cause Solution Solving General Printing ProblemsSoftware User’s Guide Software User’s Guide. Try printing aGarbled, or Text is wrongBut are blank Defective or out Toner Paper Exit Area Clearing Paper JamsPaper gently out Paper Feed Area Around the Toner Cartridge Manual TrayTips for Avoiding Paper Jams Print Quality Checklist Solving Print Quality ProblemsPrint Solving Print Quality ProblemsProblem Solution Light or fadedChange to a lighter weight pages. See Paper Scratched. Install a new toner cartridgeDirty. Clean the LSU. See Cleaning the Inside on 4.6. Contact your service representativeSkew ScatterMisformed CharactersBlack pages Wrinkles orCurl LED pattern Troubleshooting Error MessagesSee Software User’s Guide Common Windows ProblemsCommon Macintosh Problems Problem Possible Cause and Solution/etc/printcap file Common Linux ProblemsRotated and cropped Length of the option string that can be passed toMemory usage Am trying to print aPrinting Errors Owning the spooler daemon On my PCL or SPLError messages printing Your software vendor to inform them of the issueSolving Problems Printer Specifications Paper Specifications SpecificationsOperating Environment Printer SpecificationsSpecifications and Description 358 x 299 x 217 mm / 14.1 x 11.8 x 8.5Overview Paper SpecificationsSupported Sizes of Paper Size mm/in.a Weight Capacityb16 to 43 lb 60 to 165 g/m2 bond Maximum size Legal Symptom Problem with Solution Paper Guidelines for Using PaperOutput Tray Capacity Paper SpecificationsCategory Specifications Paper Output CapacityPrinter and Paper Storage Environment Index Page Software User’s Guide Installing Printer Software in Windows Setting Up a Host Computer Setting Up a Client Computer Using Your Printer in LinuxInstalling Printer Software in Windows Installing Printer Software in WindowsChanging the Software Language Choose the type of installationRemoving Printer Software Reinstalling Printer SoftwareBasic Printing Printing a DocumentSelect your printer driver from the Name drop-down list Layout Options Printer SettingsLayout Tab OrientationScaling Paper TabCopies SizeDarkness ResolutionToner Save Mode Graphics TabAbout Tab Extras TabPrinter Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting on Both Sides of Paper Manual Duplex Fitting Your Document to a Selected Paper Size Printing a Reduced or Enlarged DocumentWatermark section. The Edit Watermark window appears Using WatermarksUsing an Existing Watermark Creating a WatermarkDeleting a Watermark Using OverlaysWhat is an Overlay? Editing a WatermarkUsing a Page Overlay If necessary, click Confirm Page Overlay When Deleting a Page OverlayList box Click Delete Overlay Check the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Sharing the Printer Locally→ your printer driver name → Troubleshooting Guide Opening the Troubleshooting GuideChanging the Status Monitor Program Settings Using Status MonitorRecommended Capacities Using Your Printer in LinuxSystem Requirements Supported OSInstalling the Printer Driver Changing the Printer Connection Method Uninstalling the Printer Driver Using the Configuration ToolSelect Complete uninstall and then click Uninstall Changing Llpr Properties Using Your Printer with a Macintosh Installing Software for MacintoshInstall the Printer driver Uninstalling the Printer driverFor a USB-connected Macintosh Setting Up the PrinterPrinting For a Network-connected MacintoshPaper Type Changing Printer SettingsLayout Setting Printer Features SettingSelect the page order from the Layout Direction option Printing Multiple Pages on One Sheet of PaperLanguage, change 4 Layout properties, set Page Rev
Related manuals
Manual 118 pages 54.13 Kb