Printing on Special Materials
1Open the paper input tray.
2Load the print material in the manual tray. Do not mix types. See the following directions to load each type of print material.
•Load the envelopes in the manual tray with the flap side down.
The stamp area is on the left side and the end of the envelope with the stamp area enters the printer first and center of the manual tray.
Cautions: If you print 20 envelopes in succession, the surface of the top cover may become hot. Please exercise caution.
•Load labels in the manual tray with print side up.
Note: To prevent labels from sticking to each other, do not let the printed label sheets stack up as they are printed out.