Samsung ML-4050ND manual Reinstalling Printer Software

Page 80

Reinstalling Printer Software

You can reinstall the software if installation fails.

1Start Windows.

2From the Start menu select Programs or All Programs your printer driver name Maintenance.

3Select Repair and click Next.

4The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.

If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.

To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.

You will see a component list so that you can reinstall any item individually.

NOTE: If your printer is not already connected to the computer, the following window will appear.

After connecting the printer, click Next.

If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

The reinstallation window that appears in this User’s Guide may differ depending on the printer and interface in use.

5Select the components you want to reinstall and click Next.

If you installed the printer software for local printing and you select your printer driver name, the window asking you to print a test page appears. Do as follows:

a.To print a test page, select the check box and click Next.

b.If the test page prints out correctly, click Yes. If it doesn’t, click No to reprint it.

6When the reinstallation is done, click Finish.

11

Installing Printer Software in Windows

Image 80 Samsung ML-4050ND manual Reinstalling Printer Software, Select the components you want to reinstall and click Next
Contents Page Page Contact Samsung World Wide Country Customer Care Center Web SiteContents Specifications TroubleshootingInstalling accessories Safety and Regulatory Information Important Precautions and Safety InformationEnvironmental and Safety Consideration Laser Safety StatementOzone Safety Power SaverRecycling Radio Frequency EmissionsUnited States of America Declaration of Conformity European CountriesReplacing the Fitted Plug for UK Only Wireless GuidanceRegulatory Compliance Statements Software section Special featuresIntroduction Print in various environments Printer overview Front viewFinding more information Control panel overviewSelecting a location Clearance spaceAccessing control panel menus System setupUsing control panel menus Information menu Menu overviewJob manager menu Layout menu Paper menuSystem Setup menu Graphic menuEmulation menu PostScriptChanging the display language Using toner save modePrinting a demo Contents Software overviewSupplied software Postscript Printer Description PPD file UseWindows Printer driver featuresSystem requirements Linux MacintoshVia the control panel Network setupVia network administration programs Configuring TCP/IP Configuring EtherTalkDynamic addressing BOOTP/DHCP Supported operating systemsConfiguring IPX frame types Setting Ethernet speedRestoring the network configuration Printing a network configurationLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Type Size WeightSupported sizes of paper Print media for duplex printingMedia type Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Using the standard tray or the optional trays Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose trayPrinting to the rear cover Face up Selecting an output locationPrinting to the output tray Face down Canceling a print job Printing a document Canceling a print jobBasic printing Printing a documentToner cartridges Ordering supplies and accessoriesAccessories How to purchase Maintenance Cleaning the printerCleaning the outside of the printer Cleaning the inside of the printerPTL lens Maintaining the toner cartridge Checking the remaining tonerRedistributing toner cartridge Replacing the toner cartridge Items Yield Average Maintenance partsClearing the Toner Low Replace Toner message Troubleshooting Clearing paper jamsOptional tray Paper feed areaTray Around the toner cartridge Multi-purpose trayDuplex jam Paper exit areaDuplex unit area Tips for avoiding paper jams Troubleshooting checklistCondition Suggested solutions Understanding the status LED Understanding display messagesMessage Meaning Suggested solutions Load Low Heat ErrorLSU Motor Error OPC is CleaningToner cartridge-related messages Solving general printing problems Settings and Printers. Right Spool Settings buttonClick the Samsung ML-4050 Series PCL 6 printer iconSolving print quality problems Condition Suggested solutions Vertical RepetitiveDefects ScatterCommon Windows problems Common PostScript problemsCommon Linux problems Common Macintosh problemsInstallable Options section to InstalledInstalling accessories Precautions when installing accessoriesInstalling a memory Dimm Disconnect the power cordSelect the Samsung ML-4050 Series PS printer Setting the memory in the PostScript printer propertiesSelect the Device Settings tab Installing a wireless network interface card Removing a DimmSelecting the authentication type Configuring the wireless network parametersConfiguring basic network settings Using the hard disk Installing the hard diskSetting Encryption Restoring default values for wireless networkingSetting the hard disk in the printer properties Setting the time and datePrinting with the optional hard disk Storing a jobPrinting a stored job Deleting a stored jobControlling the active job queue To delete a file from the queueTo print a file immediately Printing using the form filesTo promote a file from the queue Specifications and Description SpecificationsPrinter specifications Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Custom Installation Select Typical installation for a local printer. Click NextSelect Custom installation. Click Next Installing Software for Network Printing Installing Printer Software in Windows Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPaper Orientation Printer SettingsLayout Tab Scaling Printing Paper TabSource Image Mode ResolutionToner Save Mode Graphics TabExtras Tab Job SettingOn the Job Setting Using a Favorite Setting Using HelpAbout Tab Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size NoneUsing Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlayUsing Windows PostScript Driver AdvancedFrom the Direct Print Utility window Overview Direct Print UtilityPrinting Setting Up a Host Computer Setting Up a Client ComputerCheck the Share this printer box Select Local Port and click New PortTroubleshooting Guide Printer SettingUnderstanding Smart Panel Toner LevelOpening the Troubleshooting Guide Using Printer Settings UtilityChanging the Smart Panel Program Settings Using Onscreen Help FileGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Uninstalling the Unified Linux Driver Click UninstallUsing the Unified Driver Configurator Printers ConfigurationOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopClasses Tab Configuring Printer PropertiesPorts Configuration Printing from Applications Printing FilesInstalling Software for Macintosh Install the Printer driverUninstalling the Printer driver Click ContinueSetting Up the Printer For a Network-connected MacintoshFor a USB-connected Mac OS 8.6 ~Printing a Document Changing Printer SettingsLayout Setting Printer Features Setting ResolutionQualityPrinting Multiple Pages on One Sheet of Paper Reverse DuplexDuplex Printing Index Image mode 15 resolution Macintosh GGGGGGGGGGGGGRev.9.00