Samsung ML-4050ND Printing on Both Sides of Paper, Printing a Reduced or Enlarged Document, None

Page 90

Printing on Both Sides of Paper

You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented.

The options are:

•Printer Setting, if you select this option, this feature is determined by the setting you’ve made on the control panel of the printer. If this option does not appear, your printer does not have this feature.

•None

•Long Edge, which is the conventional layout used in book binding.

•Short Edge, which is the type often used with calendars.

Printing a Reduced or Enlarged Document

You can change the size of a page’s content to appear larger or smaller on the printed page.

1 To change the print settings from your software

application, access printer properties. See “Printing a Document” on page 12.

2 From the Paper tab, select Reduce/Enlarge in the Printing Type drop-down list.

3 Enter the scaling rate in the Percentage input box.

You can also click the

or

button.

4 Select the paper source, size, and type in Paper Options.

3

2

5

Long Edge

2

3

5

2

 

3

2

5

3

 

5

 

Short Edge

5 Click OK and print the document.

Fitting Your Document to a Selected Paper Size

•Reverse Duplex, allows you to select general print order compare to duplex print order. If this option does not appear, your printer does not have this feature.

NOTE:

•Do not print on both sides of labels, transparencies, envelopes, or thick paper. Paper jamming and damage to the printer may result.

•To use double-sided printing, you can use only the following paper sizes: A4, Letter, Legal, and Folio, with a weight of 20~24 lbs (75~90 g/m²).

1To change the print settings from your software

application, access printer properties. “Printing a Document” on page 12.

2From the Layout tab, select the paper orientation.

3From the Double-sided Printing section, select the binding option you want.

4Click the Paper tab and select the paper source, size, and type.

5Click OK and print the document.

NOTE: If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears. Follow the on- screen instructions to complete the printing job.

This printer feature allows you to scale your print job to any

Aselected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small

document.

1 To change the print settings from your software

application, access printer properties. See “Printing a Document” on page 12.

2 From the Paper tab, select Fit to Page in the Printing Type drop-down list.

3 Select the correct size from the Target Page drop-down list.

4 Select the paper source, size, and type in Paper Options. 5 Click OK and print the document.

20 Advanced Printing

Page 89 Page 91
Image 90
Page 89 Page 91
Contents Page Page Contact Samsung World Wide Country Customer Care Center Web SiteContents Troubleshooting Installing accessoriesSpecifications Environmental and Safety Consideration Safety and Regulatory InformationImportant Precautions and Safety Information Laser Safety StatementRecycling Ozone SafetyPower Saver Radio Frequency EmissionsUnited States of America Declaration of Conformity European CountriesWireless Guidance Regulatory Compliance StatementsReplacing the Fitted Plug for UK Only Special features IntroductionSoftware section Print in various environments Printer overview Front viewFinding more information Control panel overviewSelecting a location Clearance spaceSystem setup Using control panel menusAccessing control panel menus Menu overview Job manager menuInformation menu Layout menu Paper menuSystem Setup menu Graphic menuEmulation menu PostScriptUsing toner save mode Printing a demoChanging the display language Supplied software ContentsSoftware overview Postscript Printer Description PPD file UsePrinter driver features System requirementsWindows Linux MacintoshNetwork setup Via network administration programsVia the control panel Dynamic addressing BOOTP/DHCP Configuring TCP/IPConfiguring EtherTalk Supported operating systemsRestoring the network configuration Configuring IPX frame typesSetting Ethernet speed Printing a network configurationLoading print media Selecting print mediaSupported sizes of paper Type Size Dimensions Weighta CapacitybType Size Weight Print media for duplex printingGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Using the standard tray or the optional trays Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose traySelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentOrdering supplies and accessories AccessoriesToner cartridges How to purchase Cleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerPTL lens Maintaining the toner cartridge Checking the remaining tonerRedistributing toner cartridge Replacing the toner cartridge Maintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Troubleshooting Clearing paper jamsPaper feed area TrayOptional tray Around the toner cartridge Multi-purpose trayPaper exit area Duplex unit areaDuplex jam Troubleshooting checklist Condition Suggested solutionsTips for avoiding paper jams Understanding the status LED Understanding display messagesLSU Motor Error Message Meaning Suggested solutions LoadLow Heat Error OPC is CleaningToner cartridge-related messages Solving general printing problems Click the Samsung ML-4050 Settings and Printers. RightSpool Settings button Series PCL 6 printer iconSolving print quality problems Defects Condition Suggested solutions VerticalRepetitive ScatterCommon Windows problems Common PostScript problemsInstallable Options section to Common Linux problemsCommon Macintosh problems InstalledInstalling a memory Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordSetting the memory in the PostScript printer properties Select the Device Settings tabSelect the Samsung ML-4050 Series PS printer Installing a wireless network interface card Removing a DimmConfiguring the wireless network parameters Configuring basic network settingsSelecting the authentication type Setting Encryption Using the hard diskInstalling the hard disk Restoring default values for wireless networkingPrinting with the optional hard disk Setting the hard disk in the printer propertiesSetting the time and date Storing a jobControlling the active job queue Printing a stored jobDeleting a stored job To delete a file from the queuePrinting using the form files To promote a file from the queueTo print a file immediately Specifications Printer specificationsSpecifications and Description Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Printer Software Installing Software for Local PrintingTypical Installation Custom Installation Select Typical installation for a local printer. Click NextSelect Custom installation. Click Next Installing Software for Network Printing Installing Printer Software in Windows Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPrinter Settings Layout TabPaper Orientation Paper Tab SourceScaling Printing Toner Save Mode Image ModeResolution Graphics TabJob Setting On the Job SettingExtras Tab About Tab Using a Favorite SettingUsing Help Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedOverview Direct Print Utility PrintingFrom the Direct Print Utility window Check the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Select Local Port and click New PortUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesUninstalling the Printer driver Installing Software for MacintoshInstall the Printer driver Click ContinueFor a USB-connected Setting Up the PrinterFor a Network-connected Macintosh Mac OS 8.6 ~Changing Printer Settings Layout SettingPrinting a Document Printing Multiple Pages on One Sheet of Paper Printer Features SettingResolutionQuality Reverse DuplexDuplex Printing Index Image mode 15 resolution Macintosh GGGGGGGGGGGGGRev.9.00
Top Page Image Contents